FORD 1999 F-350 - Manual (Page 214)

Fluid Ford Part Name Application Capacity
Transmission
fluid
3
Synthetic
MERCON
௡ ATF
5-speed manual 3.2L
(3.4 quarts)
Motorcraft
MERCON
௡ ATF
6-speed manual 5.5L
(5.8 quarts)
Automatic -
4R100 with
small cooler
(vehicles
equipped with
20 oil-to-air-
plate cooler) 16.1L
(17.1 quarts)
4
Automatic -
4R100 with large
cooler (vehicles
equipped with
26 oil-to-air-
plate cooler) 16.7L
(17.7 quarts)
4
Windshield
washer fluid Ultra-Clear
Windshield Washer
Concentrate All 4.0L
(4.25 quarts)
1 Your vehicle’s rear axle(s) may be filled with a synthetic lubricant that may
require a lubricant change. Refer to the Scheduled Maintenance Guide. Axle
lubricant quantities should not need to be checked unless a leak is
suspected, service is required or the axle assembly has been submerged in
water. The axle lubricant should be changed any time the rear axle has been
submerged in water.
2 Add 236 ml (8 oz.) of additive Friction Modifier C8AZ-19B546-A, Ford
Specification EST-M2C118-A for complete refill of Traction-Lok axles.
3 Ensure the correct automatic transmission fluid is used. Transmission fluid
requirements are indicated on the dipstick or on the dipstick handle.
MERCON
௡ and MERCON௡ V are not interchangeable. DO NOT mix
MERCON
௡ and MERCON௡ V. Refer to your Scheduled Maintenance Guide to
determine the correct service interval.
4 Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount of
transmission fluid and fluid level should be set by the indication on the
dipstick’s normal operating range.
5 Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford
Extended Life Engine Coolant (orange in color). Refer to Adding engine
coolant, in the Maintenance and Care chapter.
Capacities and specifications
214