Furman Sound IT-20 II - Manual (Page 8)

Furman Sound, LLC
1690 Corporate Circle.
Petaluma, California 94954-6919 USA
Phone: 707-763-1010
Fax: 707-763-1310
Web: www.FurmanSound.com
E-mail: [email protected]
051206-C
s p e c I F I c at I o n s
AC Current Output:
20 Amps (2400 watts at 60/120V)
Shutdown Voltage:
At 15-140 VAC
Inlets:
Heavy duty power cord with 20A three-pronged plug
Outlets:
12 rear (isolated), 2 front (GFCI) each rated at 20 amps
Spike Protection Modes:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
188 Vpk @ ,000 amps, 1 VAC RMS
(Tested to UL-1449 6,000 Vpk @ 3,000 amps)
Response Time:
1 nanosecond
Maximum Surge Current:
6,500 amps
Differential Noise Attenuation:
10dB @ 10kHz
40 dB @ 100 kHz
100 dB @ 10 MHz
Common Noise Attenuation:
Greater than 80 dB @ 20Hz to 20 KHz
Greater than 40 dB @ 20Khz to MHz
Linear attenuation curve from 0.05-100 ohms line impedance
Turns Ratio:
1:1, windings separated with Faraday Shield
Transformer Regulation:
% at full load
Power Consumption:
12 watts for display and control circuits
Voltmeter Accuracy:
± 1V
Dimensions:
19” W x 5.25” H x 17” D, 80 lbs.