FieldServer Spectronics FS-8700-42 - Manual (Page 7)

FS-8700-42_Spectronics Driver Manual Page 7 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel : (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.2. Client Side Connection Descriptors
Section Title
Connections
Column Title Function
Legal Values
Port
Specify which port the device is connected
to the FieldServer
P1-P8, R1-R2 2
Baud* Specify baud rate
110 – 115200, standard baud
rates only
Parity* Specify parity None (Vendor limitation)
Data_Bits* Specify data bits 8 (Vendor limitation)
Stop_Bits* Specify stop bits 1 (Vendor limitation)
Protocol Specify protocol used Spectronics
Handshaking* Specify hardware handshaking RTS, RTS/CTS, None
Poll Delay* Time between internal polls 0-32000 s, 1 s
Example
//
Client Side Connections
Connections
Port,
Protocol, Baud, Parity, Handshaking, Poll_Delay
P8, Spectronics, 9600, None, None, 0.100s
4.3. Client Side Node Descriptors
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for node
Up to 32 alphanumeric
characters
Node_ID
Station address of physical server
node
1-255
Protocol Specify protocol used Spectronics
Port
Specify which port the device is
connected to the FieldServer
P1-P8, R1-R2 2
Example:
// Client Side Nodes
Nodes
Node_Name, Node_ID, Protocol, Port
Spec_device1, 1, Spectronics, P8
2 Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.