Furuno FAX-410 - Manual (Page 16)

- 10 -
To release this timer or keylock in the timer mode, follow the procedure below.
(1) In the timer standby mode (time for the next recording is displayed):
Press key then the message on the
right is displayed. Then,
a press of key releases the timer
operation and shifts the mode to the
standard operation mode. By pressing
key before fix the timer release, the
timer standby mode is maintained.
(2) In the timer operation mode (standard operation being displayed):
Press the key and the message on theright
appears. Fixing with the key releases the
keylock (even though in the timer operation mode,
each key function is revised and all operations
are possible).
To release the timer mode in such a case, refer to 1.4.2. When the keylock off is
displayed, it is possible to clear the keylock off with the key.
２ .４ Description of setting mode
Shift to a set mode is made by pressing the key. When the mode is set, the
message on the right is shown. Pressing the key in this mode, the standard
operation mode is reset.
When a key is pressed, it is possible to
set one of the following modes as explained in
1.4.1~1.4.6.
To cancel a setting after shifting to the setting
mode and before fix it, press the key.
Pressing the key resets to the initial
setting mode (as displayed above).
２ .４.１ Switching of receiver (audio)
Switching of the internal or external receiver is set by the following procedure.
Press key. Then the receiver switching
mode is set and message on the right appears.
The displayed number 1 is for internal
PRG
PRG
TIMER RCV : OFF ?
PUSH E KEY
KEY LOCK : OFF ?
PUSH E KEY
SET PRG. NO. 1-9
ESC PUSH C KEY
PRG
N
0～9
PRG
PRG
AF IN : INT
1-INT 2-EXT
E
C
E
C
C
1