FRIGIDAIRE 309000848 User Manual

Page 9

Air Conditioner Features

(continued)

DO THIS:

PRESS

YOU WILL SEE TIME CHOSEN:

STEP 9 — TO INCREASE

DELAYED START TIME:

☞

Note: Tap or hold the UP arrow(^) to increase delayed start time by .5 hours (up to 10 hours), then in 1 hour increments up
to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.).

The unit will then come on in Cool and HI fan mode. The temperature maintained will be the same as you previsouly set. If you
want to change it, Press ‘Cool” or “Energy Saver Mode” pad, whichever you desire, then Up or Down arrows until the desired
temperature is indicated on the display. Pressing timer “On/Off” or after 5 seconds, the control will automatically change the
display back to the hours remaining until the unit will start.

Switching unit on at any time will nullify this setting.

DO THIS:

PRESS SLEEP

PAD

YOU WILL SEE:

STEP 10 — SLEEP FEATURE:

☞

DO THIS:

PRESS OFF

(If unit is running)

PRESS TIMER/OFF

YOU WILL SEE:

STEP 8 — TIMER-DELAY

START FEATURE:

☞

Note: To do this, the unit must be in the off position.

When first set, the display will show .5. (one half hour),to increase the time up to 24 hours, go to step 9.

Note: In this “MODE” the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The
temperature will then increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained
for 7 hours before it returns to the originally selected temperature. This ends the “Sleep” MODE and the unit will continue to
operate as originally programmed. The “Sleep” MODE program can be cancelled at any time during operation by pressing
“Sleep” MODE, “On/Off”, “Fan Only” or the “

” buttons, on either the Control or the Remote. “Time Delay Stop”

limit reached will also end “sleep” MODE.

V /

0.5