FujiFilm FUJICHROME VELVIA RVP100 - Manual (Page 4)

– 4 –
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICHROME Velvia 100 Professional [RVP100]
15. PACKAGING
Size Item Contents
135 Film Box New Exclusive Design
Identification Color: Violet Blue
Plastic Case Same as the current product (Tranparent container with a black cap).
Cartridge New Exclusive Design
Identification Color: Violet Blue
120 Film Box New Exclusive Design
Identification Color: Violet Blue
11. LIGHT SOURCES FOR VIEWING
Use a standard transparency viewer. Visual responses
will differ with light source quality and brightness.
Therefore, employ a viewer which meets the ISO/ANSI
standard.*
* The ISO standard (ISO 3664:2000) specifies an illuminated
viewer surface with a color temperature derived from a CIE
illuminant D50 (D:Daylight) with a reciprocal color temperature
of 5000K, an average brightness of 1270cd/m
2 ±
320cd/m 2 , a
brightness uniformity of more than 75%, a light diffusion level
of more than 90% and an average color rendition assessment
value of more than Ra90. Transparency viewers should meet
these standards.
12. PRINTS AND DUPLICATES
This film can produce high-quality prints when used with
digital printers such as the Fuji Digital Minilab Frontier.
High-quality duplicates can be made on FUJICHROME
DUPLICATING FILM CDU TYPE II (CDU II).
13. RETOUCHING AND BLEACHING
Changes in density and color balance can be made
by using readily available retouching dyes. In regard
to bleaching, this film is as resistant to color dye fading
as Velvia 100F, as a result of its improved color image
stability (anti-fading characteristics).
14. SHEET FILM CODE NOTCHING
A notch code identifying this emulsion type is located in
the upper right-hand corner when the emulsion surface
is facing toward you. The same notch is provided for
QuickLoad type films.
5 roll pack