Franklin STK-2032 - Manual (Page 5)

3
Once you have installed a cartridge in
your BOOKMAN, you must select which
book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
.
These are sample books.
3. Press or to highlight the
book you want to use.
4. Press
ENTER
to select it.
Warning: Never install or remove a
cartridge when BOOKMAN is on. If you
do, information that you entered in its
built-in book, and in an installed cartridge,
will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the car-
tridge with the notches in
the slot.
4. Press the cartridge down
until it snaps into place.
Installing Cartridges
➤ Removing Cartridges
Warning: When you remove a
cartridge to install another, informa-
tion that you entered into the
removed cartridge will be erased.
Selecting Books
➤ About Screen Illustrations
Some screen illustrations in this
User’s Guide may differ from what
you see on the actual screen. This
does not mean that your BOOK-
MAN is malfunctioning.