Furuno RC-1500-1T User Manual

Page 21

2 – 7

2. Unfasten screws A and push back B (for both right and left) shown below to remove the

printer cover.

Paper

Paper
Cover

Screw

3. Swing out the paper cover by 100

to 120

then lift it up from the right-hand side to remove

it from the printer.

4. Referring to the previous figure, lift the paper bail C. As shown in the figure which follows,

remove the roll paper stay D and then take out the roll paper.

Loading new roll paper

5. Insert the roll bar into the roll paper from the left side. Set the roll paper to the roll paper

cradle.

Roll Bar

Roll Paper

Roll Paper
Cradle

Type: A2 1PLT W
Code No.: 000-134-903

Type: T-214 white OKFIP
Code No.: 000-119-433

Select
either.
(no carbon)