Fisher & Paykel OB60S9DE - Manual (Page 39)

37
Alert codes
If there is a problem, the oven will:
automatically suspend all oven functions
beep five times
display an alert code.
Important!
Do not turn off the mains power supply to the oven if you get an alert code, unless the instructions in the
chart following specifically instruct you to. There are cooling fans within the oven which are needed to
cool the oven’s components. Turning off the power while the oven is too hot may damage the oven and its
surrounding cabinetry.
What to do if an alert code is displayed
1 If the beeping hasn’t stopped already, press any button to stop it.
2 Make a note of the alert code displayed. You may need this information.
3 Check the chart following to see if you can fix the problem yourself and follow the instructions.
4 If you can fix the problem and the alert code does not reappear, you can keep using your oven.
OR
If you can’t fix the problem yourself or the alert code reappears and the problem persists: wait
until the cooling fans have stopped and the oven has completely cooled down, then turn the
power to the oven off and call your Authorised Repairer or Customer Care with the alert code
information.
Alert code Possible causes What to do
The oven has overheated. 1 Allow the oven to cool down.
2 Once the oven has cooled down, the
alert code will disappear. You can now
use the oven again.
F
+ number
+
Technical fault. 1 Note down the alert code.
2 Wait until the cooling fans have
stopped and the oven has completely
cooled down.
3 Turn the power to the oven off.
4 Call your Authorised Repairer or
Customer Care with the alert code
information.