FRIGIDAIRE 2020252A0373 - Manual (Page 6)

6
(continued)
2009 Electrolux Home Products, Inc. All rights reserved.
Installation in a double-hung sash window
4. Close the window sash securely against the window slider kit. (Fig. 15)
5. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and outer window sash, as shown in Fig.16.
2. Attach the window slider kit to the window stool. Adjust the length of
the window slider kit according to the width of window. Cut the adjustable
window slider kit if the width of window is less than 26.6 inches (Fig. 14).
Open the window sash and place the window slider kit on the window
stool. (Fig. 13)
1. Cut the foam seals(adhesive type) to the proper lengths and attach them
to the window and stool. (Fig. 12)
Installation in a sliding sash window
4. Close the sliding sash securely against the window slider kit. (Fig. 19)
1. Cut the foam seals(adhesive type) to the proper lengths and attach them
to the window frame. See Fig.17.
2. Attach the window slider kit to the window stool. Adjust the length of
the window slider kit according to the height of window. Cut the adjustable
window slider kit if the height of window is less than 26.6 inches (Fig. 14).
Open the window sash and place the window slider kit on the window
stool. See Fig.18.
5. Cut the foam seal to an appropriate length and seal the open gap
between the sliding sash and outer window sash, as shown in Fig.20.
Fig. 13
Window slider kit
Window stool
Fig. 15
Window slider kit
Window stool
Window stool
Fig. 12
Foam seal A
(adhesive type)
Foam seal
Fig. 16
Fig. 20
Foam seal
Fig. 19
Fig. 18
Window slider kit
26.6"~48.5"
Fig. 14
Cut this side to fit your window
Fig. 17
Foam seal
(adhesive type)
Installation Instructions
Installation Instructions
26.6"~48.5"