Foxconn 661M03 - Manual (Page 73)

Chapter 4 Driver CD Introduction
65
661M03 Series User Manual
3 4
Click here Click here
Install USB 2.0 Driver
Click from the main menu and enter the install driver menu (as
shown in fig. 1). Click to open the USB 2.0 setup guide. Please
read the guide carefully and select the relevant installation method. If you want to
know further information, please visit our website: www.foxconnchannel.com.
1
Read this guide
Using 4-/6-Channel Audio
The motherboard is equipped with the Realtek ALC655 chip, which provides
support for 6-Channel audio output, including 2 front, 2 rear, 1 center and 1
subwoofer channel. ALC655 allows the board to attach 4 or 6 speakers for a
better surround sound effect. This section will tell you how to install and use the
4-/6-Channel audio function on the board.
Installing the Audio Driver
You need to install the driver for the Realtek ALC655 chip before you can use the
4-/6-Channel audio function. Follow the procedures described below to install
the drivers for different operating systems.