FUNAI EC520E - Manual (Page 30)

– 30 – EN
0C28
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con-
sulting the following checklist.
TROUBLESHOOTING GUIDE
Problem Corrective Action
No Picture or Sound • Try a new channel, if OK, then possible station trouble.
• Make sure the power is turned on.
• Press SELECT on the remote control to select TV mode. Then try
other TV feature.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
Bars On Screen • If outside antenna is being used, check for broken wire.
• Check for local interference.
Picture Distorted or Blurred • Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
Picture Rolls Vertically • Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture • If outside antenna is being used, check for broken wire.
• Check for local interference.
No Color • Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust COLOR control.
Poor Reception on Some Channels • Try a new channel, if OK, then possible station trouble.
Ghosts in Picture • Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
Weak Picture • Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust CONTRAST & BRIGHT control.
Sound OK, Picture Poor • Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust CONTRAST & BRIGHT control.
Picture OK, Sound Poor • Try a new channel, if OK, then possible station trouble.
• Check for local interference.
Different color marks on screen • Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the unit away from the appliances,
the unit can repair itself automatically. If you want to repair immedi-
ately, unplug the unit power cord, then plug it in again 30 minutes or
so later. This automaticaly resets the unit.
Problem Corrective Action
No power • Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
The unit does not respond to • Check if the power plug is connected to an AC outlet.
the remote control. • Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
• You have to be within 23 feet of the unit.
• Check if the correct mode is selected. If not switch the mode by
pressing SELECT on the remote control,whichever you need.
TV Mode