Tv operation, Degaussing, Watching a tv program – FUNAI EC520E User Manual

Page 15: Picture control

– 15 –

0C28

DEGAUSSING

Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect
power cord from AC outlet then reconnect it after
30 minutes.

WATCHING A TV PROGRAM

Turn on the unit

Press POWER to turn on the unit.

Select the channel number

Press CHANNEL(CH.) K/L to select your desired
channel number or press the number buttons.
Notes for using the number buttons on the remote
control:

•

You must precede single-digit channel numbers
with a zero (Example: 02 ... 09).

•

When selecting cable channels which are higher
than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).

Remember:

If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4, then the
channel to be viewed must be selected on the cable
box or satellite box.

Adjust sound

Press VOLUME(VOL.) X/Y to
adjust the volume.

NOTE:

•

If you press CHANNEL(CH.) K/L in the DVD
mode, you can change the TV channels.
Even if you turn off the unit in the DVD mode,
when you turn it on again, it will go into the TV
mode.

BRIGHT

to decrease

to increase

brightness

CONTRAST

to decrease

to increase

contrast

COLOR

to pale

to brilliant

TINT

to purple

to green

SHARPNESS

to soft

to clear

PICTURE CONTROL

The unit’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.

Make sure ...

•

The unit power must be turned on.

Select “PICTURE CONTROL”

Press PICTURE on the remote control.

Select item you want to adjust

Press Arrow (K/L) until desired control is displayed.

BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS

Adjust the picture control

Press Arrow (

) to adjust to your desired level

within 5 seconds.
NOTE:

•

At step [3], the picture adjustment display will dis-
appear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step [1].

•

Even if there is a power failure of any kind, the
unit will retain its memory for this feature.

VOLUME

C C C C C C

C C C C C C C C C C

BRIGHT

– P

P P

P C

C P

P P

TV OPERATION