Fluke PM8907 - Manual (Page 2)

OPERATION
Please read these instructions
carefully before using the Power
Adapter/Battery Charger.
Warning
To avoid electrical shock, connect the
PM8907 Power Adapter to the AC
outlet before connection to the
ScopeMeter
® test tool.
z
The Power Adapter/Battery Charger
operates the ScopeMeter ® test tool
from the local line.
z The Power Adapter/Battery Charger
charges the internal Battery Pack of
the test tool.
z Observe the polarity 5-mm power
jack; the outer contact is plus (+)
polarity.
z Do not open the PM8907, it is not
serviceable.
SYMBOLS
International electrical symbols used are
explained below.
See explanation on
Instruction Sheet
DOUBLE INSULATION
(Protection Class)
Conformité Européenne
Do not dispose of this
product as unsorted
municipal waste. Go to
Fluke's website for recycling
information.
Figure 1. PM8907/801
Figure 2. PM8907/804
Figure 3. PM8907/806
Figure 4. PM8907/807
Figure 5. PM8907/808
Figure 6. PM8907/813
Caution
Before you connect the PM8907/808 to
the local line, first check the
preselected voltage setting on this
unit. (see Figure 5.)
For connection to the mains outlet,
use a power cord that complies with
national standards.