beautypg.com

Maintenance and care – FORD 2000 Explorer User Manual

Page 256

background image

Replacing tail lamp/turn/backup lamp bulbs

The tail lamp/turn/backup lamp bulbs are located in the tail lamp
assembly, one just below the other. Follow the same steps to replace
either bulb:

1. Open the liftgate to expose the
lamp assemblies.

2. Remove the two screws from the
lamp assembly.

3. Carefully remove the lamp
assembly by pulling it rearward.

4. Rotate the bulb socket
counterclockwise and remove from
lamp assembly.

5. Pull the bulb straight out of the
socket and push in the new bulb.

6. To complete installation, follow the removal procedure in reverse
order.

Replacing foglamp bulbs

1. Remove the bulb socket from the
foglamp by turning
counterclockwise.

2. Disconnect the electrical
connector from the foglamp bulb.

3. Connect the electrical connector to the new foglamp bulb.

4. Install the bulb socket in the foglamp turning clockwise.

Maintenance and care

256