FujiFilm FinePix A201 - Manual (Page 12)

22 23
2
LCD monitor OFF
LCD monitor ON
Framing Guideline displayed
FRAMING GUIDELINE FUNCTION
You can select the Framing Guide function in
“q” Photography mode. The mode shown on
the LCD monitor switches each time you press
the “DISP” button. Press the “DISP” button to
display the framing guideline.
● ! The framing guideline is not recorded on the image.
●
! The lines in the scene frame roughly divide the
recorded pixels into three parts horizontally and
vertically. When the image is printed, the resulting
print may be shifted slightly from the scene frame.
Scene
Use this frame when you want to position your
main subject in the center of the frame or when
you want to align your shot with the horizon.
This feature provides a clear guide to the
subject size and the overall balance of the shot
so that you get exactly the shot you want.
Number of Available Shots
■ Standard number of shots per SmartMedia
The number of shots may increase or decrease slightly depending on the type of subject. Note also that the larger
the SmartMedia capacity, the greater the discrepancy between the standard number of shots and the actual number
of shots.
The number of available shots appears on the
LCD monitor.
● ! See P.54 for information on changing the File Size
and Quality settings.
● ! The factory default settings at shipment are 1M (File
Size) and N (Quality: NORMAL).
✽ The number of available shots are shown for formatted SmartMedia.
4MB (MG-4S)
8MB (MG-8S)
16MB (MG-16S/SW)
32MB (MG-32S/SW)
64MB (MG-64S/SW)
128MB (MG-128SW)
File Size
Quality Mode
Image Data Size
8 1600 ✕ 1200
FINE
Approx.770KB Approx.390KB Approx.200KB Approx.620KB
4 9 19 6
10 19 39 12
25
50
101
204
20 39 75
41 79 152
82
166
159
319
306
613
NORMAL BASIC FINE
Approx.320KB
12
25
49
99
198
398
NORMAL
Approx.130KB
30
61
122
247
497
997
NORMAL
9 1280 ✕ 960 0 640 ✕ 480
q TAKING PICTURES (AUTO MODE)
STILL IMAGE MODE