Air conditioner features, Continued), Light on – FRIGIDAIRE 220213A196 User Manual
Page 9: Check filter feature: you will see, Remote sensing/follow me feature, Clean air feature, You will see: light on, On some models), Do this
9
Air Conditioner Features
(continued)
CHECK FILTER FEATURE:
YOU WILL SEE:
Note: This feature is a reminder to clean the Air Filter (See Care
and Cleaning) for more efficient operation and cooling. The LED
(light) will illuminate after 250 hours of operation. To reset after
cleaning the filter, press the “ Check Filter ” button and the light
will go off.
LIGHT On
CLEAN AIR FEATURE
(on some models):
DO THIS:
PRESS
CLEAN AIR
BUTTON
DO THIS:
AFTER CLEANING
PRESS CHECK FILTER BUTTON
YOU WILL SEE:
LIGHT On
Note: When this feature is “ON”, the electronic air purifier is
energized to remove pollen and impurities from the air. To cancel this
feature, press the Clean Air button (the LIGHT will turn off).
ON
OFF
SET TEMP.
FAN SPEED
Mode
Energy Saver
Sleep
Light
Clock
Cancel
Timer
Fan
Reset
Lock
F
Clean Air
Follow Me
REMOTE SENSING/FOLLOW ME FEATURE
(on some models)
:
DO THIS:
PRESS REMOTE
SENSING/FOLLOW ME
BUT T ON ON
LIGHT pulsing On & Off intermittently.
NOTE: Unit display shows “set” temperature
NOTE: Remote display
is actual temperature at
remote control only
Note: This feature can be activated from the remote control ON L Y , the unit must be in a cooling mode.
T o activate the remote sensing feature, point the remote contro l towards the unit and press the remote sensing button. Next, use the
buttons to set the desired temperature at the remote. (Note that the set temperature will only be displayed on the unit itself). The LIGH T on
the unit control will pulse to indicate it received the signal. The LIGH T on the remote contro l will pulse each time it sends a signal. It will con-
tinue to send this signal until the feature is deactivated by pressing the remot e sensing button. If the unit does not receive the remote sensing
signal during an y 3 m in u te interval , the u n i t will b e e p to i n di c a t e the remote sensing mode has ended. The display on the remot e control indicates
the temperature at the remote ON L Y . The unit display indicates the set temperature.
ON
OFF
SET TEMP.
FAN SPEED
Mode
Energy Saver
Sleep
Light
Clock
Cancel
Timer
Fan
Reset
Lock
F
Clean Air
Follow Me