Fisher & Paykel DW60CE - Manual (Page 13)

11
Installation instructions
Plumbing -- Waste connection
These drainage options are designed to eliminate problems that occur with combined
sink-dishwasher waste systems.
Drainage option A: Separate sink and dishwasher waste systems
The standpipe must have a minimum diameter of 38 mm and stand 750 mm above the floor.
Use the supplied drain hose support to hold the drain hose in place in the standpipe.
Important!
We do not recommend connecting the drain hose or drain pipe directly to a built-in waste disposal unit.
Drainage option B: Combined sink and dishwasher waste systems
When connecting the drain hose to a sink trap with a drain hose spigot, make sure that the drain
hose is supported to the height of the bench.
Ensure the drain spigot has a minimum hole diameter of 15 mm and it has been drilled out.
Secure the drain hose connection with the clip supplied.
min.
min.
750 mm
750 mm
min.38 mm
min.
120
mm
min.
Ø1
5mm
min.
Ø
21
mm
Waste disposal
unit (optional)
Power outlet with
disconnection switch
Power outlet with
disconnection switch
Hose supplied
min. 200 mm
min. 200 mm
Water
Waste
Waste
Hose supplied
Waste
Water
Vent
Ensure drain hose is supported to
height of bench