HONDA 2010 Element - Manual (Page 154)

The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For additional information on
damaged discs, see page 184.
If there is still a problem, the error
message will appear again. Press the
eject button, and pull out the disc.
Insert a different disc. If the new disc
plays, there is a problem with the
first disc. If the error message cycle
repeats and you cannot clear it, take
your vehicle to a dealer.
Error
Message
Cause Solution
FOCUS Error
Press the eject button, and pull out the disc.
Check if it is inserted correctly in the disc player.
Make sure the disc is not scratched or damaged
(see page 184).
Mechanical Error
Press the eject button, and pull out the disc.
Check the disc for damage or deformation (see
page 184).
If the disc cannot be pulled out, or the error
message does not disappear after the disc is
ejected, see your dealer.
TOC Error
Press the eject button, and pull out the disc.
Check the disc for damage or deformation (see
page 184).
High Temperature
Will disappear when the temperature returns to
normal.
Disc Player Error Messages (Models with navigation system)
148