Attaching lens cap inserting battery into remote, Control – Hitachi DZ-HS503 User Manual
Page 23
23
ATTACHING LENS CAP
1
Attach the shorter end of lens cap string to
the lens cap.
2
Attach the longer end of lens cap string to the
hand strap of DVD video camera/recorder.
3
Push the both sides of cap inward and attach
it over the lens.
Note
:
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• When recording, attach the lens cap to the hand strap
by hooking the tab inside the cap onto strap for
comfortable shooting.
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1
While inserting a fine rod into the hole
marked PUSH, pull the battery holder out
forward.
2
Insert the lithium battery with the positive R
terminal facing down.
3
Slide the cover to close it.
Note
:
• The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible
with remote control: Replace the battery.
Shorter end
Longer end
Push and fit
Battery holder