Healthrider HREX04981 - Manual (Page 5)

5
ASSEMBLY
Assembly requires two persons. Place all parts of the recumbent cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench .
PART CHART
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers
to the quantity used in assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-assembled.
Console
Screw (20)Ð3
#10 x 5/8Ó
Screw (30)Ð1
M6 x 15mm
Hex Screw (29)Ð4
M5 x 15mm
Screw (69)Ð1
M8 x 80mm Carriage Bolt (63)Ð2
M4 x 25mm
Screw (21)Ð1
M8 x 15mm
Button Screw (74)Ð4
M8 x 70mm
Carriage Bolt (72)Ð2
M6 x 38mm
Hex Screw (73)Ð4
M8 x 40mm
Button Bolt (24)Ð4
M8 Black Flat
Washer (57)Ð16
M8 Nylon
Locknut (56)Ð8
M8 Curved
Washer (28)Ð7
M6 Nut
(78)Ð1
M8 x 45mm
Button Screw (17)Р3