beautypg.com

Close the top lid, Put in the laundries, Usage of detergent – haier HWM88-0566T User Manual

Page 10: Preparation before washing, How to use whitener how to use washing powder, How to use softener

background image

If you open the top lid,the machine will stop working and alarm in spinning process.

4. Close the top lid

The capacity of washing of the machine refer to the largest weight of the
standard laundries under dry condition that can be washed in one time.
Laundries quantity in one washing cycle shall be lower than the rated
capacity.

The thickness ,size , type of the cloth will influence the actual washing capacity.
It is suitable to put in reasonable amount of laundries and the laundries can be
turned round in washing for one time washing.

2.Put in the laundries

Add washing powder and softener into
the box directly as per indicated in left figure

After adding, close the box.

How to use whitener

How to use washing powder

Washing powder with poor quality or long-time storage may
get caked. Please clean the detergent box duly in usage.

Dissolve directly inside the washing machine: (not
applicable for fuzzy and reserve program)
1.Add some water

(select the

"1" water level)

2.Add washing powder. Run for about 30s to fully dissolve
the Powder. Then push the"start/pause" button.
3.Put in laundries. Select suitable water level. Push the
"start/pause" button again.

Quick dissolving of washing powder:
1. Prepare warm water of 30 C and container.
2. Add washing powder while stirring to dissolve it
completely.

It is not recommended to use rich-foam washing powder.

Washing powder inlet

Washing powder box

Softener inlet

Control panel seat

3. Usage of detergent

Liquid detergent
inlet

If you select save program, it is suggested to use liquid
detergent instead of washing powder to guarantee the
washing effect.

How to use softener

Please add suitable washing powder as per the laundries
quantity, the set water level and water quantity.

It is suggested to add washing powder into the box
directly under fuzzy program and reserve program.

See to the manual of softener for the usage and dosage.
When adding softener into the softener inlet of washing
powder box, note that it shall not exceed the lower side
of the cap.
Do not leave the softener for long period after adding it
into the box. Otherwise it may be solidified and block the inlet.
As the softener is easy to solidify, please clean the box
frequently.(You shall clean it each time you use reserve
function).
Before use softener, you must select to sterilize function

The whitener shall not touch laundries directly.

Add water to stipulated level. Dilute the whitener with container,
and then pour it into the liquid whitener inlet slowly.

Laundries with color or pattern is not colorfast, thus not applicable.

For whitener in powder, dissolve it before use.

See to the manual of whitener for the usage and dosage.

Confirm if there's
special requirement
for the laundries.

Clear the pocket.
Take out the coins ,
sand, hairpins etc.

Fasten the buttons
and zippers.

When the pulsator is
running ,the buttons of
the laundries may cause
noise. For the sake of
discretion ,please put the
laundries with buttons
into other laundries.

The quantity of the
laundries shall not
exceed the rated
value. The big
laundries like the
jeans shall be put
in loosely.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into
mesh bag for washing.

1.Preparation before washing

Preparation before washing

1.Connect the water inlet hose
2.Confirm that the washing machine is earthed

reliably. Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.

3.Put down the drain hose

4.Slanting or uneven ground may result in unstable

working or abnormal noise. Please make the
machine stand horizontally.

Pay attention to followings before washing the laundries