HP VA-1809 - Manual (Page 9)

(6) LAN Ethernet port (10/100BaseTX): This port is used to connect to a LAN
using an Ethernet cable.
(7) RS-232C connector (9-pin male): This connector is used to connect a
personal computer using an RS-232C cable.
(8) I/O connector (25-pin female): This connector is used to implement optional
functions.
(9) EXT MONITOR (VGA) connector: The same output signals as the ones
displayed on the LCD screen are output from this connector in analog form.
Resolution is fixed at 1024
× 768 (at 60 Hz).
2.3.3 VA-1809 on-screen display
ANALYZE
ERROR REPORT
Info Video Timing
Info AVI InfoFrame
Info SPD InfoFrame
Info Audio InfoFrame
Info Mpeg InfoFrame
Inof Channel Status Bit
Info Audio Timing
Info HDCP
Info DDC Monitor
NO ERROR
NO ERROR
NO ERROR
NO ERROR
NO ERROR
NO ERROR
NO ERROR
NO ERROR
ESC -> TOP
HDMI Receiver
H = 31.47 kHz DOTCLK = 25.175MHz
V = 59.93 Hz
DETAILS
INC
DEC
DIRECT NUM
ERROR
(1) Title bar: This is where the titles of the on-screen display contents are
displayed.
(2) Description area: This is where details of the analysis results, etc. are
displayed.
(3) Help bar: Advice on the key operations is available here.
(4) Timing bar: The input timing data information appears here.
(5) Status icon: The types, statuses, etc. of the input and output signals are
displayed using icons.
(6) Key menu: The meanings of the FUNC buttons on the right side of the menu
displays are indicated here.
2.4 Concerning the internal data
6