Hoshizaki KMS-1400MLH - Manual (Page 9)

II. Installation and Operating Instructions
IMPORTANT
1. Install in accordance with all applicable national, state, and local regulations.
2. Remove the shipping carton, tape, and packing material. If any are left in the
units, they will not work properly.
3. Ensure all components, fasteners, and thumbscrews are securely in place
after installation.
A. Location
1. Icemaker
CAUTION
1. This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F (+7°C to +38°C); Normal
operating water temperature should be within +45°F to +90°F (+7°C to
+32°C). Operation of the icemaker, for extended periods, outside of these
normal temperature ranges may affect icemaker performance.
2. This icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to
go below 32°F (0°C). See "III.C. Preparing the Icemaker for Long Storage."
For best operating results:
• Icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• No clearance is required for proper operation.
• Avoid choosing a site where dripping is not allowed.
• Location should provide a firm and level foundation for the equipment.