Hotpoint WMM65 - Manual (Page 16)

Wash programmes
Spin speed
(rpm)
Wash
Temp
˚C
Wash
Label
Press
Button
Display
Window
shows Fabric
5.5kg
White cotton and linen
without special finishes
95 5.5kg
Non-colourfast cotton,
linen or viscose
40
5.5kg
Colourfast cotton
linen or viscose without
special finishes
60
16
WMA66 - 1600
WMM65 - 1600
WMA64 - 1400
WMA66 - 1600
WMM65 - 1600
WMA64 - 1400
WMA66 - 1600
WMM65 - 1600
WMA64 - 1400
Three
times
Twice
Once
PR
OGR
AMMES
& OPTIONS
Fabric type - Cotton
Maximum
dry weight
load
To select a programme to suit your individual requirements use the following series of
tables, explaining the wash programme buttons and programme details.
The programmes have been listed by Fabric Type.
The programme times ‘Time to End’...
For each wash programme and option(s) selected the machine automatically
calculates the estimated programme length ‘Time to End’. This is displayed in hours
and minutes shortly after the wash programme temperature has been displayed.
The ‘Time to End’ will then remain lit throughout the wash programme and counts
down to the end of the programme.
Note: These estimated programme times are dependant on the temperature and
pressure of the incoming water supply, the option(s) selected and the load being
washed. They may, therefore change during the fill stages of each programme to take
into account the extra heating or filling time required.
To review the current wash programme during the wash cycle...
This feature allows you to check the running wash programme.
Press the ‘Start’ button once. The wash programme temperature will be illuminated in
the display window followed by the spin speed.
After a few seconds the display window will return to the ‘Time to End’ showing the
remaining programme length.
If you decide the selected programme does not suit your requirements you can
change the programme, see previous page ‘To change a programme’.