Humminbird 141c - Manual (Page 24)

19
System Status
Use System Status to view system connections and
to conduct a unit self-test.
The following screens are displayed in turn
when you press the VIEW button when using System
Status:
• Self Test
• Accessory Test.
Self Test displays results from the internal diagnostic self test, including unit serial
number, Printed Circuit Board (PCB) serial number, software revision, total hours of
operation and the input voltage.
Accessory Test lists the accessories connected to the
system.
NOTE: The speed accessory will be detected only if the
paddlewheel has moved since your 100 Series™ Fishing
System was powered up.
Exit System Status by powering your Fishing
System off.
System Status Accessory Test Screen
System Status Self Test Screen