Hotpoint HDA2000M - Manual (Page 6)

WASHING
NORMAL
MINUTES
The dishwasher remembers your
last cycle* so you don’t have to
reprogram each time.
When the dishwasher is loaded
and the door is latched, the control
panel will display the last settings
you selected.
If you don’t want to change any of
the settings, simply touch START.
*If there has been a power failure,
NORMAL WASH and HEATED
DRY will automatically be
programmed. Make any new
selections as desired and touch
START.
What happens in each cycle
Wash
Water Use Cycle Time
WASH CYCLES Cycle Sequence
PANS 11.0 gal. Pre-Wash/ Pre-Rinse Pre-Rinse Main Rinse Rinse *64 minutes
Pre-Rinse Wash
NORMAL WASH 11.0 gal. Pre-Wash/ Pre-Rinse Pre-Rinse Main Rinse Rinse minutes
Pre-Rinse Wash
LIGHT WASH 9.3 gal. Pre-Rinse Pre-Rinse Main Rinse Rinse minutes
Wash
CHINA-CRYSTAL 7.7 gal. Pre-Rinse Main Rinse Rinse 41 minutes
Wash
RINSE & HOLD 3.7 gal. Pre-Rinse Pre-Rinse 10 minutes
*unextended times. These Dry Options:
times may be increased up 15
minutes if necessary for your
dishwasher to heat the water to
proper temperature for good
washability.
HEATED DRY. Available on all
wash cycles except RINSE &
HOLD. Add 33 minutes to wash
cycle time.
ENERGY SAVER DRYING.
Drying heater is turned off. Dishes
dry naturally.
6