Maintenance – Harbor Freight Tools 93296 User Manual

Page 6

Text mode
Original mode

Page 6

SKU 93296

For technical questions, please call 1-800-444-3353

Maintenance

Make sure your Impact Wrench is disconnected from the air hose before attempting any
maintenance.

Wipe the Impact Wrench down with a lint free cloth after each use.

Make sure the Anvil (6) is clear of dirt or debris. If possible, spray it with compressed air
before each use.

Periodically, add a high quality machine oil to the oil inlet by removing the Oil Screw
(39). See illustration, below.

If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that
the Air Inlet (29) is facing up. Squeeze the Trigger (34), and place one or two drops of oil
into the Air Inlet (29). Squeezing the Trigger (34) allows the oil to circulate in the motor.

Air Regulator (32)

Trigger (34)

Anvil (6)

Air Inlet (29)

Oil Screw

(39)