Hearth and Home Technologies Heat-N-Glo Dakota 42 - Manual (Page 15)

Heat-N-Glo Lifestyle Collection • Dakota 42/Dakota 42H • 4036-905 Rev I • 10/05 15
A. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox.
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in-
side the fi rebox or underneath in the control cavity.
C. Accessories
Install approved accessories per instructions included with
accessories. Refer to Section 13.
Shock Risk
Fire Risk
Use ONLY optional accessories approved
for this appliance.
• Using non-listed accessories voids
warranty.
• Using non-listed accessories may result
in a safety hazard.
• Only Hearth & Home Technologies
approved accessories may be used
safely.
WARNING
Explosion Risk
• Follow ember placement instructions in
manual.
• Do NOT place embers directly over
burner ports.
• Replace ember material annually.
Improperly placed embers interferes with
proper burner operation.
WARNING
Back legs in grate brackets
Figure 9.1 Placement of Embers
9
Appliance Setup
D. Lava Rock, Ember Bed, Grate Assembly & Placement
Placing the Ember Bed and Grate Assembly
• Raise grate and place ember bed on fl oor of fi rebox (see
Figure 9.1). Ensure ember bed does not cover burner.
• Ensure burner tube is positioned on raised burner
supports.
• Ensure grate assembly is over burner assembly ember
bed. Center from left to right. Place back legs in grate
brackets (see Figure 9.1)
Figure 9.2 Placement of Lava Rocks
Placing Lava Rock
• After logs have been placed spread part of the lava
rock (included) between the burner and ashlip (see
Figure 9.2).
• Do NOT use the entire bag of lava rock. Save remainder
for future use.