Hotpoint 22 - Manual (Page 15)

To remove the base
grille, open the doors
and then pull the
grille straight out.
5/16
″
Socket
Wrench
Raise
DOOR ALIGNMENT
After leveling, make sure that doors are even at the top.
To make the doors even,
adjust the refrigerator door.
Using a 5/16 ″ socket wrench, turn the door adjusting
screw to the right to raise the door, to the left to lower
it. (A nylon plug, embedded in the threads of the pin,
prevents the pin from turning unless a wrench is used.)
After one or two turns of the wrench, open and close
the refrigerator door and check the alignment at the
top of the doors.
Installation Instructions
15