Hotpoint HDA969 - Manual (Page 5)

●
For WARMER
cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT ON.
c. Leave the door unlatched.
ON .
OFF ● .
●
d. turn Cycle Indicator
Dial clockwise to DRY/PLATE
WARMER position.
e. Latch the door to start the cycle.
Cycle selection hints
It is important to follow the loading
instructions on pages 8 and
POTS & PANS—For items such
as pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads
everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes that
have been pre-rinsed before loading.
Also, for washing very
soiled dishes with soils that have
not dried on.
What happens in each cycle
●
You’ hear occasional c1
●
During the drying period:
sounds:
—The motor stops.
—Soft food disposer shredding
— Water vapor comes through the
action.
vent by the door latch during
—Drain valve opening to pump drying and when water is being
water out. pumped out.
—Timer control cycle
progresses.
—Detergent cup opening.
POTS PANS
NORMAL WASH
LIGHT WASH
RINSE HOLD
RINSE HOLD—For rinsing
partial loads which will be washed
later. Select DRYING HEAT OFF.
DRY/PLATE WARMER—For
warming clean dishes serving
plates for the serving hot food.
I
12.1
10
times, These times be increased approximately
Water Heat Option is selected.
Drying Options:
DRYING HEAT ON—Available on all
cycles except RINSE HOLD. minutes
wash cycle time.
DRYING HEAT OFF—(NO Heat Drying). Drying heater turned Dishes naturally.
5