Hotpoint DE47X1 - Manual (Page 12)

12
GB
Electronic Clock & Automatic
Oven Timer Operation
SETTING THE TIME OF DAY
Step 1 Make sure all oven
controls are turned Off.
Step 2
Check the electricity
supply to the cooker is turned on.
Step 3
When switched on the
display will show 0.00 and the
Auto symbol, flashing
intermittently.
Step 4 Press & hold in both the
Cook Period & End Time buttons
together.
Step 5
With the Cook Period &
End Time buttons still held in,
press either the "+" or "-" buttons
to set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer
has been set for an Auto Cooking Programme.
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day
is set correctly.
Step 2
Press and hold the
Minute Minder button.
Step 3
With the Minute Minder
button held in, set the required
Minute Minder period using the
"+" and "-" buttons. A 'bell'
symbol will light up.
Release all buttons and the timer display will revert
back to the time of day. The 'bell' symbol will remain lit
to signify that a Minute Minder period has been set.
At the end of the set time an audible tone will be
heard, and the 'bell' symbol will disappear.
Step 4 To cancel the audible
tone press the Minute Minder
button.
Note 1 When the Minute Minder has been set, the time
remaining can be checked at any time by
simply pressing the Minute Minder button.
Note 2 If necessary the Minute Minder can be
cancelled before the tone sounds by pressing
and holding the Minute Minder button and then
at the same time pressing the "-" button until
0.00 appears in the display window.
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be
selected using your timer:-
(a) To set the timer to switch the oven(s) On and Off
Automatically
(b) To set timer to switch on immediately and OFF
automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE
OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a
chosen period before the oven switches off
Automatically.
Step 1 Check that the correct time of day is set, if
not follow instructions for setting the time
of day.
Step 2 Place food onto the correct shelf position
in the oven and close the oven door(s).
Step 3 Press and hold in the
Cook Period button. The display
will read 0.00 with the 'cookpot'
symbol lit.
Step 4
With the Cook Period
button still held in, set the
required Cook Period using the
"+" and "-" buttons.
Release the buttons and the
timer display will revert to the
time of day with the 'Auto'
symbol and 'cookpot' symbol lit.
Step 5 Press and hold in the
End Time button. The display
will read the earliest possible
end time for the Cook Period that
you have set above. The 'Auto'
symbol and 'cookpot' symbol
will be lit.
Step 6
With the End Time
button still held in, use the "+"
and "-" buttons to set the 'End
Time' (i.e. The time you require
the oven to switch off ).
Release all the buttons and the timer will revert back
to the time of day.
The 'Auto' symbol will remain lit
to signify that an Auto Cooking
Programme has been set. The
'cookpot' symbol will go out.
Step 7 Turn the oven control(s) to the required tem-
perature, and if necessary select the
appropriate oven function.
A
U
T
O 0 0 0
..
A
U
T
O 0 0 0
.
0 0 0
.
0 0 0
.
A
U
T
O
0 0 0
.
A
U
T
O 4 1 2 0
.
A
U
T
O 6 1 2 0
.
A
U
T
O 4 1 2 0
.