Horizon Fitness 4.3E - Manual (Page 13)

BEFORE YOU
BEGIN
ASSEMBL
Y
13
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP
GUIDE RAIL
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR
LOWER LINK ARM
TEFLON WASHERS (O)
SPACER (P)
L0WER HANDLEBAR
NUT (Q)
BOLT (N)
A) Open HARDWARE BAG FOR
STEP 6.
B) Insert SPACER (P) into LOWER
LINK ARM.
C) Insert 2 TEFLON WASHERS (O)
between the LOWER LINK ARM
and LOWER HANDLEBAR.
D) Attach LOWER LINK ARM to
LOWER HANDLEBAR using
BOLT (N) and NUT (Q).
E) Attach INSIDE & OUTSIDE
ELBOW COVERS together using
2 SCREWS (R).
F) Repeat on other side.
NOTE: If you have difficulty
fitting the lower link arm into
the lower handlebar bracket,
slide the roller wheel forward
or backward on the guide
rail for better access to the
bracket.
BOLT (N)
60 mm
Qty: 2
SPACER (P)
44 mm axis
Qty: 2
NYLON
NUT (Q)
Qty: 2
TEFLON WASHER (O)
28 mm
Qty: 4
SCREW (R)
15 mm
Qty: 4
HARDWARE BAG FOR STEP CONTENTS :
SCREW (R)
SCREW (R)
INSIDE ELBOW COVER OUTSIDE ELBOW COVER