Huffy M6611641 - Manual (Page 27)

02/07 ID# M6611641
27
10.
Roll completed assembly to desired position.
Fill tank with water (approx. 34 gallons (129 Liters) or sand (approx. 300
lbs. (136 kg) and rotate the cap (41) into base (1).
9.
Install net (43).
2. 4. 3. 1.
1
41
Cap (41) MUST be tightened COMPLETELY and SECURELY to prevent leakage.
CHECK WATER LEVEL BEFORE EACH USE!
WARNING!
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
IF USING SAND: 2 GALLONS
OF ANTI-FREEZE IS NOT
REQUIRED
CAUTION!
SAND SAND
(300 lb.) (300 lb.)
(136 kg) (136 kg)
DO NOT LEAVE ASSEMBLY
UNATTENDED WHEN EMPTY;
IT MAY TIP OVER.
WARNING!