Document Outline

• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9
• Getting Started 1
• Printer Power 2
• Printer Configuration
• Media & Ribbon Loading
• Loading Ribbon 7
• Removing Ribbon 8
• Media Sensor Positioning
• Media Sensor Position 9
• Printer Operational Check 10
• Printer Operation
• Front Panel Keys 13
• Front Panel LEDs 14
• Additional Front Panel Controls 14
• Media Calibration
• Calibration Control 17
• Care & Adjustments
• Lubrication 24
• Printhead Pressure Adjustment 24
• Power Rewind/Power PeelMedia Alignment 25
• Printer Options
• Power Rewind/Power Peel Option 28
• Value Peel Option 30
• Cutter Option 31
• Electronics Options 33
• Communication Options 33
• Troubleshooting
• Troubleshooting Tables 35
• Printer Self-Tests 38
• Resetting Factory Defaults 44
• Initializing the Flash Memory and PCMCIA Card 45
• Automatically Executed Format 45
• Print Error Conditions 46
• Printer Specifications
• Printing Specifications 48
• Ribbon Specifications 48
• Media Specifications 49
• Zebra Programming Language (ZPL II®) 50
• Bar Codes 50
• Standard Printer Fonts 51
• Optional Printer Fonts 53
• Appendix A
• Printer Configuration (Deluxe Front Panel) 59
• Appendix B
• Serial Data Communications 69
• Parallel Data Communications 72
• Appendix C
• Fuse Replacement 74
• Shipping 74
• Setting Darkness For fiIn-Specfl Bar Codes 74
• ASCII Code Chart 77
• Glossary
• Index
• A
  • AC Power 2
  • Adjustments
    • Media Sensor Position 9
    • Printhead Pressure 24
  • ASCII Control Codes
    • XOFF (DC3) 71
    • XON (DC1) 71
• C
  • Calibration 17
  • Caution
    • Ribbon Width 8
    • Shipping 74
    • Unshielded Cables 71
  • CCITT V.24 71
  • Cleaning 19
    • Cutter Module 22
    • Platen 20
    • Printhead 20
    • Recommended Schedule 19
    • Sensors 20
  • Communication Interfaces 69
    • IEEE 1284 Parallel 72
    • RS-232 Serial 70
    • RS-485 Serial 71
  • Communications 2
  • Configuration 55
    • Factory Settings 3, 4
  • Configuration Label 39
• D
  • Damage Report 1
  • DIP Switches 55
  • DTR (Data Terminal Ready) 71
• E
  • EIA RS232 71
  • Electrical Noise 69
  • Error Conditions 46
    • LCD Display 27
• F
  • Factory Defaults 44
  • FCC Rules and Regulations 71
  • Front Panel
    • Deluxe 27, 59
    • Standard 55
  • Front Panel Control Keys 58
  • Front Panel Keys 13
  • Front Panel LEDs 14
  • Fuse Replacement 73
• G
  • Glossary 79
• I
  • IN SPEC Bar Codes 74
  • Initialization
    • Flash Memory 45
    • PCMCIA Card 45
• L
  • Liquid Crystal Display 13, 27
  • Loading
    • Media 5
    • Ribbon 7
  • Lubrication 24
• M
  • Maintenance 1
  • Media
    • Continuous 9
    • Fanfold 6
    • Non-Continuous 9
    • Roll 6
  • Media Alignment
    • Power Peel 25
    • Power Rewind 25
  • Media Guide 6, 29, 31, 32
  • Media Loading 5
  • Media Sensor
    • Operation 9
    • Position 9
  • Media Sensors 9
  • Media Supply Guide 6, 29, 31, 32
  • Media Supply Hanger 6, 29, 31, 32
• O
  • Optional Fonts 53
  • Options
    • Communication 33
    • Cutter 31
    • DRAM Memory 33
    • Flash Memory 33
    • PCMCIA Memory Card 33
    • Power Peel 28
    • Power Rewind 28
    • Value Peel 30
• P
  • Power ON Self Test 35
  • Printer Configuration 59
  • Printer Configuration Label 39
  • Printer Options 28
  • Printer Power 2
  • Printer Specifications 47, 48
  • Printhead Pressure 24
• R
  • Reporting Damage 1
  • Ribbon Loading 7
  • Ribbon Removal 8
  • Ribbon Supply Spindle 8
  • Ribbon Takeup Spindle 8
  • RS-232 70
    • Chassis Ground 69
    • DSR (Data Set Ready) 69
    • DTR (Data Terminal Ready) 69
    • RTS (Request To Send) 69
    • RXD (Receive Data) 69
    • Signal Ground 69
    • TXD (Transmit Data) 69
  • RS-485 71
    • Input A (+) 69
    • Input B (-) 69
    • Output A (+) 69
    • Output B (-) 69
    • Signal Ground 69
  • RTS (Request To Send) 71
• S
  • Self-Test Labels 38
  • Self-Tests
    • Power ON 35
    • Printer 38
  • Sensor Positioning 9
  • Settings
    • Communicaitons 56
    • Darkness 58
    • Operating Modes 57
    • Print Darkness 58
  • Shipping 74
  • Shipping Container 74
  • Shipping Damage 1
  • Specifications 48
  • Standard Fonts 51
  • Storage and Reshipping 71
  • Switch Settings 55
• T
  • Troubleshooting 35
• U
  • Unpacking 1
• W
  • Warning
    • AC Power 2, 73
    • Earth Ground 2, 73
    • Equipment Safety 2, 73
    • Personnel Safety 2, 73
  • Z
    • ZPL II 1, 17, 50
    • ZPL II Instructions
      • Changing Prefixes & Delimiters (^CC, ^CD, ^CT) 37
      • Configuration Update (^JUS) 44
      • Label Length (^LL) 9