Document Outline

• DK-A1 EN 01-30.fm .pdf
  • Important Instruction
    • Important Instruction
    • SPECIAL NOTES
    • Important Instruction
    • IMPORTANT SAFETY INSTRUCTIONS
    • Important Instruction
    • IMPORTANT SAFETY INSTRUCTIONS (continued)
      • IMPORTANT SAFETY INSTRUCTIONS (continued)
    • General Information
    • Special Note
      • Supply of this product does not convey a license nor imply any right to distribute content create...
      • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
    • General Information
    • Precautions
      • n General
        • • l Use the unit on a firm, level surface free from vibration.
            • l Use the unit on a firm, level surface free from vibration.
          • l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...
            • l Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and e...
          l Do not place anything on top of the unit.

          • l Do not place anything on top of the unit.
            • l Do not place anything on top of the unit.
              • l Do not place anything on top of the unit.
          l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...

          • l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...
            • l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...
              • l Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely lo...
          l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...

          • l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...
            • l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...
              • l If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug th...
          • l In case of an electrical storm, unplug the unit for safety.
            • l In case of an electrical storm, unplug the unit for safety.
          • l Do not lift the unit by holding left or right side panel, it may cause the unit damage or broken.
            • l Do not lift the unit by holding left or right side panel, it may cause the unit damage or broken.
          • l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...
            • l Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can...
            • l The AC power plug is used as disconnect device and shall always remain readily operable.
          • l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...
            • l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...
              • l Do not remove the outer cover, as this may result in electric shock. Refer internal service to ...
          l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).

          • l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).
            • l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).
              • l This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C).
          • The voltage used must be the same as that specified on this unit. Using this product with a highe...
          n Volume control

          • The sound level at a given volume setting depends on speaker efficiency, location and various oth...
          General Information
          Controls and indicators

          • n Top panel
            • Reference page
              • Reference page
                • Reference page
            • 1. iPod Dock 15
              • 1. iPod Dock 15
                • 1. iPod Dock 15
            • 2. POWER ON/STAND-BY Button 12, 17, 23
              • 2. POWER ON/STAND-BY Button 12, 17, 23
                • 2. POWER ON/STAND-BY Button 12, 17, 23
            • 3. Clock Button 13
              • 3. Clock Button 13
                • 3. Clock Button 13
            • 4. iPod Button 14, 15
              • 4. iPod Button 14, 15
                • 4. iPod Button 14, 15
            • 5. Alarm Indicator 19
              • 5. Alarm Indicator 19
                • 5. Alarm Indicator 19
            • 6. Auxiliary Button 21
              • 6. Auxiliary Button 21
                • 6. Auxiliary Button 21
            • 7. Snooze/Dimmer Button 12, 19, 23
              • 7. Snooze/Dimmer Button 12, 19, 23
                • 7. Snooze/Dimmer Button 12, 19, 23
            • 8. Tuner Button 17
              • 8. Tuner Button 17
                • 8. Tuner Button 17
            • 9. Remote Sensor 11
              • 9. Remote Sensor 11
                • 9. Remote Sensor 11
            • 10. Alarm Button 19
              • 10. Alarm Button 19
                • 10. Alarm Button 19
            • 11. Alarm ON/OFF Button 19
              • 11. Alarm ON/OFF Button 19
                • 11. Alarm ON/OFF Button 19
            • 12.
              • 12.
                • 12.
            • 13. Play/Pause Button 14, 16
              • 13. Play/Pause Button 14, 16
                • 13. Play/Pause Button 14, 16
            • 14. Skip Down, Tuner Preset Down Button 13, 16, 18
              • 14. Skip Down, Tuner Preset Down Button 13, 16, 18
                • 14. Skip Down, Tuner Preset Down Button 13, 16, 18
            • 15. Skip Up, Tuner Preset Up Button 13, 16, 18
              • 15. Skip Up, Tuner Preset Up Button 13, 16, 18
                • 15. Skip Up, Tuner Preset Up Button 13, 16, 18
            • 16. EQ Button 12
              • 16. EQ Button 12
                • 16. EQ Button 12
            • 17. Volume Down Button 12
              • 17. Volume Down Button 12
                • 17. Volume Down Button 12
            • 18. Volume Up Button 12
              • 18. Volume Up Button 12
          General Information
          Controls and indicators (continued)

          • Controls and indicators (continued)
            • n Display
              • Reference page
                • Reference page
                  • Reference page
              • 1. Alarm Indicator 19
                • 1. Alarm Indicator 19
                  • 1. Alarm Indicator 19
              • 2. Sleep Indicator 20
                • 2. Sleep Indicator 20
                  • 2. Sleep Indicator 20
              • 3. iPod Indicator 14
                • 3. iPod Indicator 14
                  • 3. iPod Indicator 14
              • 4. Aux Indicator 21
                • 4. Aux Indicator 21
                  • 4. Aux Indicator 21
              • 5. FM Stereo Mode Indicator 17
                • 5. FM Stereo Mode Indicator 17
                  • 5. FM Stereo Mode Indicator 17
              • 6. FM Stereo Receiving Indicator 17
                • 6. FM Stereo Receiving Indicator 17
                  • 6. FM Stereo Receiving Indicator 17
              • 7. Summer Time Indicator 13
                • 7. Summer Time Indicator 13
                  • 7. Summer Time Indicator 13
            • n Rear panel
              • Reference page
                • Reference page
                  • Reference page
              • 1. AM Loop Antenna Terminal 10
                • 1. AM Loop Antenna Terminal 10
                  • 1. AM Loop Antenna Terminal 10
                • 2. AM Antenna Ground Terminal 10
                  • 2. AM Antenna Ground Terminal 10
                • 3. FM 75 Ohms Antenna Jack 10
                  • 3. FM 75 Ohms Antenna Jack 10
                • 4. Auxiliary Input Jacks 21
                  • 4. Auxiliary Input Jacks 21
                • 5. Headphone Jack 21
                  • 5. Headphone Jack 21
                • 6. Video Out Jack 10
                  • 6. Video Out Jack 10
                • 7. Summer Time Switch 13
                  • 7. Summer Time Switch 13
                • 8. AC Input 10
                  • 8. AC Input 10
          General Information

          • n Remote control
            • Reference page
              • Reference page
                • Reference page
            • 1. Remote Control Transmitter 11
              • 1. Remote Control Transmitter 11
            • 2. Function Button 12
              • 2. Function Button 12
                • 2. Function Button 12
                  • 2. Function Button 12
                    • 2. Function Button 12
            • 4. Volume Up and Down Buttons 12
              • 4. Volume Up and Down Buttons 12
                • 4. Volume Up and Down Buttons 12
                  • 4. Volume Up and Down Buttons 12
                • 5. Skip Down, Tuner Preset Down Button 13, 16, 18
                  • 5. Skip Down, Tuner Preset Down Button 13, 16, 18
                    • 5. Skip Down, Tuner Preset Down Button 13, 16, 18
                      • 5. Skip Down, Tuner Preset Down Button 13, 16, 18
                  • 6. Play Mode Button 16
                    • 6. Play Mode Button 16
                      • 6. Play Mode Button 16
                  • 7. Tuning Up and Down Buttons 17
                    • 7. Tuning Up and Down Buttons 17
                  • 8. Memory Button 18, 20
                    • 8. Memory Button 18, 20
            • 9. Clock Button 13
              • 9. Clock Button 13
            • 10. Snooze/Dimmer Button 12, 19
              • 10. Snooze/Dimmer Button 12, 19
            • 11. Sleep Button 20
              • 11. Sleep Button 20
            • 12. Alarm Button 19
              • 12. Alarm Button 19
            • 13. Skip Up, Tuner Preset Up Button 13, 16, 18
              • 13. Skip Up, Tuner Preset Up Button 13, 16, 18
            • 14. Display Button 13, 16
              • 14. Display Button 13, 16
            • 15. Play/Pause Button 14, 16
              • 15. Play/Pause Button 14, 16
            • 16. E Sound/Demo Button 10, 12
              • 16. E Sound/Demo Button 10, 12
            • 17. Clear Button 18
              • 17. Clear Button 18
            • 18. EQ Button 12
              • 18. EQ Button 12
              • Before using remote control, please remove plastic shield at battery holder.
          Preparation for Use
          System connections
          • Make sure to unplug the AC power cord before any connections.
          n Antenna connection
          • Supplied FM antenna:
            • Supplied FM antenna:
            • Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direct...
          • Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the anten...
          • < Assembling >
            • < Assembling >
          • < Attaching to the wall >
            • < Attaching to the wall >
          • Wall
            • Wall
          • Screws (not supplied)
            • Screws (not supplied)
          n Outdoor FM antenna

          • Use an outdoor FM antenna if you require better reception. Consult your dealer.
          • • When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.
          n Connecting iPod to TV

          • iPod photo and 5th Generation iPod with photo and video can be viewed by connecting to TV/monitor...
          n AC power connection

          • After checking all the connections have been made correctly, plug the AC power cord of this unit ...
          • • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
              • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
                • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
                  • l Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged peri...
          • n Demonstration mode
            • n Demonstration mode
            • To cancel the demonstration mode:
              • To cancel the demonstration mode:
              • When the unit is in the demonstration mode, press the E SOUND/DEMO button. The unit will enter th...
          • To return to the demonstration mode: When the unit is in the power stand-by mode, press the E SOU...
            • To return to the demonstration mode:
              • To return to the demonstration mode:
          • Note: When the power is on, the E SOUND/DEMO button can be used to select the E SOUND mode.
            • Note:
              • Note:
          Preparation for Use
          Remote control

          • n Battery installation
          • 1
            • 1
              • 1
          • While pushing the locking tab toward the center of the remote control, slide out the battery holder.
            • While pushing the locking tab toward the center of the remote control, slide out the battery holder.
              • While pushing the locking tab toward the center of the remote control, slide out the battery holder.
          • 2
            • 2
              • 2
          • Remove the old battery from the battery holder, insert the new battery and then slide the battery...
            • Remove the old battery from the battery holder, insert the new battery and then slide the battery...
          l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...

          • l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...
            • l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...
              • l Remove the battery if the unit will not be used for long periods of time. This will prevent pot...
          l Do not use rechargeable battery (nickel-cadmium battery, etc.).

          • l Do not use rechargeable battery (nickel-cadmium battery, etc.).
            • l Do not use rechargeable battery (nickel-cadmium battery, etc.).
              • l Do not use rechargeable battery (nickel-cadmium battery, etc.).
          l Installing the battery incorrectly may cause the unit to malfunction.

          • l Installing the battery incorrectly may cause the unit to malfunction.
            • l Installing the battery incorrectly may cause the unit to malfunction.
              • l Installing the battery incorrectly may cause the unit to malfunction.
          l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...

          • l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...
            • l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...
              • l Replace the battery if the operating distance is reduced or if the operation becomes erratic. P...
          l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...

          • l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...
            • l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...
              • l Periodically clean the transmitter on the remote control and the sensor on the unit with a soft...
          l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...

          • l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...
            • l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...
              • l Exposing the sensor on the unit to strong light may interfere with operation. Change the lighti...
          l Keep the remote control away from moisture, heat, shock, and vibrations.

          • l Keep the remote control away from moisture, heat, shock, and vibrations.
            • l Keep the remote control away from moisture, heat, shock, and vibrations.
              • l Keep the remote control away from moisture, heat, shock, and vibrations.
          n Test of the remote control

          • Check the remote control after checking all the connections (see page 10).
          • Point the remote control directly at the remote sensor on the unit.
            • Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music.
          Basic Operation
          General control

          • n To turn the power on
            • Press the ON/STAND-BY button to turn the power on.
          • After use:
            • After use:
              • After use:
            • Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.
          n Illumination light control

          • Press the SNOOZE/DIMMER button to adjust the brightness of the display and LED.
          • n Volume auto fade-in
            • n Volume auto fade-in
              • If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16...
          • n Volume control
            • n Volume control
            • Main unit and remote control operation: Press the VOL (+ or –) button to increase or decrease the...
              • Main unit and remote control operation: Press the VOL (+ or –) button to increase or decrease the...
          n E SOUND control

          • The special sound created to enhance iPod sound as sound been produced by CD-Audio quality. When ...
          n Equalizer

          • When the EQ button is pressed, the current mode setting will be displayed. To change to a differe...
          n Function

          • When the FUNCTION button on remote control is pressed, the current function will change to differ...
          • Note:
          • The backup function protect the memorized function mode for a few days should there be a power fa...
          Basic Operation
          Setting the clock

          • In this example, the clock is set for the 12-hour (12:00 AM) display.
          • 1 Press the CLOCK button for more than 2 seconds.
            • 1 Press the CLOCK button for more than 2 seconds.
              • 1 Press the CLOCK button for more than 2 seconds.
                • 1 Press the CLOCK button for more than 2 seconds.
          • 2 Press the or button to select 12-hour or 24-hour display and then press the CLOCK button.
            • 2 Press the
              • 2 Press the
                • 2 Press the
          • “12:00 AM”
            • “12:00 AM”
          • The 12-hour display will appear.
            • The 12-hour display will appear.
          • (12:00 AM - 11:59 PM)
            • (12:00 AM - 11:59 PM)
          • “0:00 AM”
            • “0:00 AM”
          • The 12-hour display will appear.
            • The 12-hour display will appear.
          • (0:00 AM - 11:59 PM)
            • (0:00 AM - 11:59 PM)
          • “0:00”
            • “0:00”
          • The 24-hour display will appear.
            • The 24-hour display will appear.
          • (0:00 - 23:59)
            • (0:00 - 23:59)
          • 3 Press the or button to adjust the hour and then press the CLOCK button.
            • 3 Press the
              • 3 Press the
                • 3 Press the
          • Press the or button once to advance the time by 1hour. Hold it down to advance continuously.
            • Press the
          • 4 Press the or button to adjust the minutes and then press the CLOCK button.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          • Press the or button once to advance the time by 1minute. Hold it down to change the time in 5-mi...
            • Press the
          [When the unit is in the stand-by mode or in demonstration mode.]
          Press the CLOCK button to enter the clock function.
          [When the power is on]
          Press DISPLAY button on remote control to toggle between the function information and clock display.
          l The clock will continue counting for 8 hours should there be a power failure or the AC power co...
          l The “CLOCK ADJ” will appear or time will flash to confirm the time display when the AC power su...
          Perform “Setting the clock” from step 1. Step 2 (selecting the 12- hour or 24-hour display) will ...
          • 1
            • 1
          • Clear all the programmed contents. [Refer to “Clearing all the memory (reset)” on page 23 for det...
            • Clear all the programmed contents. [Refer to “Clearing all the memory (reset)” on page 23 for det...
          • 2
            • 2
          • Perform “Setting the clock” from step 1.
            • Perform “Setting the clock” from step 1.
          • 1
            • 1
          • Slide the ST switch to +1 to advance the time 1 hour. indicator will appear.
            • Slide the ST switch to +1 to advance the time 1 hour.
          • 2
            • 2
          • Slide the ST switch to -1 to turn the clock back 1 hour.
            • Slide the ST switch to -1 to turn the clock back 1 hour.
          iPod
          Listening to the iPod

          • Supported iPod models:
            • l iPod nano (software 1.0 above)
              • l iPod nano (software 1.0 above)
                • l iPod nano (software 1.0 above)
                  • l iPod nano (software 1.0 above)
            • l iPod photo (software 1.0 above)
              • l iPod photo (software 1.0 above)
                • l iPod photo (software 1.0 above)
                  • l iPod photo (software 1.0 above)
            • l iPod mini (software 1.2 above)
              • l iPod mini (software 1.2 above)
                • l iPod mini (software 1.2 above)
                  • l iPod mini (software 1.2 above)
            • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
              • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
                • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
                  • l 5th Generation iPod (software 1.0 above) (Dock connector equipped Click Wheel model)
            • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
              • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
                • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
                  • l 4th Generation iPod (software 3.0.2 above) (Dock connector equipped Click Wheel model)
            • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
              • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
                • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
                  • l 3rd Generation iPod (software 2.2 above) (Dock connector equipped Click Wheel model)
              • l Please update your iPod unit to the latest software version before using it. Please visit Apple...
                • l Please update your iPod unit to the latest software version before using it. Please visit Apple...
                  • l Please update your iPod unit to the latest software version before using it. Please visit Apple...
                    • l Please update your iPod unit to the latest software version before using it. Please visit Apple...
              • l Once the iPod is connected to the unit it will begin charging.
                • l Once the iPod is connected to the unit it will begin charging.
                  • l Once the iPod is connected to the unit it will begin charging.
                    • l Once the iPod is connected to the unit it will begin charging.
              • l The iPod unit can not be charged while the main unit is in the stand-by mode.
                • l The iPod unit can not be charged while the main unit is in the stand-by mode.
                  • l The iPod unit can not be charged while the main unit is in the stand-by mode.
                    • l The iPod unit can not be charged while the main unit is in the stand-by mode.
              • When you press any of the following buttons, the unit turns on.
              • l iPod button (main unit): The unit turns on and the iPod function is activated.
                • l iPod button (main unit): The unit turns on and the iPod function is activated.
                  • l iPod button (main unit): The unit turns on and the iPod function is activated.
                    • l iPod button (main unit): The unit turns on and the iPod function is activated.
          • n iPod adaptor connection
            • n iPod adaptor connection
          • iPod Adaptor No.
            • iPod Adaptor No.
          • iPod Description
            • iPod Description
          • Capacity
            • Capacity
          • 3
            • 3
          • iPod mini
            • iPod mini
          • 4GB & 6GB
            • 4GB & 6GB
          • 4
            • 4
          • 4G iPod & U2 iPod
            • 4G iPod & U2 iPod
          • 20GB
            • 20GB
          • 5
          • 4G iPod
          • 40GB
            • 40GB
          • 6
            • 6
          • iPod photo & Color U2 iPod
          • 20GB & 30GB
          • 7
            • 7
          • iPod photo
          • 40GB & 60GB
            • 40GB & 60GB
          • 6
          • iPod with color display
          • 20GB
            • 20GB
          • 7
            • 7
          • iPod with color display
          • 60GB
          • 8
            • 8
          • iPod nano
          • 2GB & 4GB
            • 2GB & 4GB
          • 9
            • 9
          • iPod (10/12/05 w/video)
          • 30GB
          • 10
            • 10
          • iPod (10/12/05 w/video)
          • 60GB
            • 60GB
          Note:
          iPod

          • 1. Push the iPod sliding door until end.
            • 2. Insert the iPod adaptor into unit and connect your iPod.
          • n To remove iPod adaptor
          • n iPod playback
          • 1 Press the ON/STAND-BY button to turn the power on.
            • 1 Press the ON/STAND-BY button to turn the power on.
              • 1 Press the ON/STAND-BY button to turn the power on.
                • 1 Press the ON/STAND-BY button to turn the power on.
          • 2 Press the iPod button on main unit once or FUNCTION button on remote control repeatedly to sele...
            • 2 Press the iPod button on main unit once or FUNCTION button on remote control repeatedly to sele...
              • 2 Press the iPod button on main unit once or FUNCTION button on remote control repeatedly to sele...
                • 2 Press the iPod button on main unit once or FUNCTION button on remote control repeatedly to sele...
          • 3 Open the iPod terminal door and insert iPod unit in iPod dock of main unit.
            • 3 Open the iPod terminal door and insert iPod unit in iPod dock of main unit.
              • 3 Open the iPod terminal door and insert iPod unit in iPod dock of main unit.
                • 3 Open the iPod terminal door and insert iPod unit in iPod dock of main unit.
          • 4 Press the / button to start playback.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          iPod
          Listening to the iPod (continued)

          • n Various iPod functions
          • Function
            • Function
              • Function
          • Main unit
            • Main unit
              • Main unit
          • Remote control
            • Remote control
              • Remote control
          • Operation
            • Operation
              • Operation
          • Play
            • Play
              • Play
          • Press in the pause mode.
            • Press in the pause mode.
          • Pause
            • Pause
              • Pause
          • Press in the playback mode.
            • Press in the playback mode.
          • Track up/ down
            • Track up/ down
          • Press in the playback or pause mode. If you press the button in the pause mode, press the / butto...
            • Press in the playback or pause mode. If you press the button in the pause mode, press the
          • Fast forward/ reverse
            • Fast forward/ reverse
              • Fast forward/ reverse
                • Fast forward/ reverse
          • Press and hold down in the playback mode.
            • Press and hold down in the playback mode.
          • Release the button to resume playback.
            • Release the button to resume playback.
          • Display
            • Display
          • ____
          • iPod back light ON.
            • iPod back light ON.
          • Repeat
            • Repeat
          • ____
          • Press to toggle repeat mode.
            • Press to toggle repeat mode.
          • Shuffle
            • Shuffle
          • ____
          • Press and hold down to toggle shuffle mode.
            • Press and hold down to toggle shuffle mode.
          The operations described below depend on the generation iPod you are using.
          When the main unit is powered on, the iPod unit will automatically power on when docked in the un...
          * Invalid for 3rd iPod Generation.
          Caution:

          • l Unplug all accessories for the iPod before inserting it into the iPod dock.
            • l Unplug all accessories for the iPod before inserting it into the iPod dock.
              • l Unplug all accessories for the iPod before inserting it into the iPod dock.
                • l Unplug all accessories for the iPod before inserting it into the iPod dock.
          Radio
          Listening to the radio

          • • When you press any of the following buttons, the unit turns on.
            • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
              • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
                • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
                  • l TUNER button (main unit): The unit turns on and the TUNER function is activated.
          • n Tuning
          • 1 Press the ON/STAND-BY button to turn the power on.
            • 1 Press the ON/STAND-BY button to turn the power on.
              • 1 Press the ON/STAND-BY button to turn the power on.
                • 1 Press the ON/STAND-BY button to turn the power on.
          • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
            • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
              • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
                • 2 Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select t...
          • 3 Press the TUNING ( or ) button on remote control to tune in to the desired station.
            • 3 Press the TUNING (
              • 3 Press the TUNING (
                • 3 Press the TUNING (
          • Manual tuning:
            • Manual tuning:
              • Manual tuning:
          • Press the TUNING ( or ) button as many times as required to tune in to the desired station.
            • Press the TUNING (
          • Auto tuning:
            • Auto tuning:
              • Auto tuning:
          • When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning will start automatic...
            • When the TUNING (
          l When radio interference occurs, auto scan tuning may stop automatically at that point.

          • l When radio interference occurs, auto scan tuning may stop automatically at that point.
            • l When radio interference occurs, auto scan tuning may stop automatically at that point.
              • l When radio interference occurs, auto scan tuning may stop automatically at that point.
          l Auto scan tuning will skip weak signal stations.

          • l Auto scan tuning will skip weak signal stations.
            • l Auto scan tuning will skip weak signal stations.
              • l Auto scan tuning will skip weak signal stations.
          l To stop the auto tuning, press the TUNING (

          • l To stop the auto tuning, press the TUNING (
            • l To stop the auto tuning, press the TUNING (
              • l To stop the auto tuning, press the TUNING (
          Press the TUNER button (main unit) or FUNCTION button (remote control) to display the “ST” indica...
          l “

          • l “
            • l “
              • l “
          l If the FM reception is weak, press the TUNER button (main unit) or FUNCTION button (remote cont...

          • l If the FM reception is weak, press the TUNER button (main unit) or FUNCTION button (remote cont...
            • l If the FM reception is weak, press the TUNER button (main unit) or FUNCTION button (remote cont...
              • l If the FM reception is weak, press the TUNER button (main unit) or FUNCTION button (remote cont...
          • FM stereo mode indicator
            • FM stereo mode indicator
          • FM stereo receiving indicator
            • FM stereo receiving indicator
          Radio
          Listening to the radio (continued)

          • n Memorizing a station
            • You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tu...
          • 1 Perform steps 1 - 3 in “Tuning” on page 17.
            • 1 Perform steps 1 - 3 in “Tuning” on page 17.
              • 1 Perform steps 1 - 3 in “Tuning” on page 17.
                • 1 Perform steps 1 - 3 in “Tuning” on page 17.
          • 2 Press the MEMORY button on remote control to enter the preset tuning saving mode.
            • 2 Press the MEMORY button on remote control to enter the preset tuning saving mode.
              • 2 Press the MEMORY button on remote control to enter the preset tuning saving mode.
                • 2 Press the MEMORY button on remote control to enter the preset tuning saving mode.
          • 3 Within 1 minute, press the or button to select the preset channel number.
            • 3 Within 1 minute, press the
              • 3 Within 1 minute, press the
                • 3 Within 1 minute, press the
          • Store the stations in memory, in order, starting with preset channel 1.
            • Store the stations in memory, in order, starting with preset channel 1.
          • 4 Within 1 minute, press the MEMORY button on remote control to store that station in memory.
            • 4 Within 1 minute, press the MEMORY button on remote control to store that station in memory.
              • 4 Within 1 minute, press the MEMORY button on remote control to store that station in memory.
                • 4 Within 1 minute, press the MEMORY button on remote control to store that station in memory.
          • If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat th...
            • If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat th...
          • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
            • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
              • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
                • 5 Repeat steps 1 - 4 to set other stations, or to change a preset station.
          • When a new station is stored in memory, the station previously memorized for that preset channel ...
            • When a new station is stored in memory, the station previously memorized for that preset channel ...
          The backup function protects the memorized stations for a few days should there be a power failur...
          n To recall a memorized station
          • Press the or button for less than 0.5 seconds to select the desired station.
            • Press the
          n To scan the preset stations

          • The stations saved in memory can be scanned automatically. (Preset memory scan)
          • 1
            • 1
          • Press the or button for more than 0.5 seconds.
            • Press the
          • The preset number will flash and the programmed stations will be tuned in sequentially, for 5 sec...
            • The preset number will flash and the programmed stations will be tuned in sequentially, for 5 sec...
          • 2
            • 2
          • Press the or button again when the desired station is located.
            • Press the
          n To erase entire preset memory
          • 1
            • 1
          • Press and hold the CLEAR button on remote control for more than 3 seconds. “TUN CLEAR” will be di...
            • Press and hold the CLEAR button on remote control for more than 3 seconds. “TUN CLEAR” will be di...
          • 2
            • 2
          • Within 10 seconds, press the MEMORY button on remote control. “COMPLETE” will be displayed.
            • Within 10 seconds, press the MEMORY button on remote control. “COMPLETE” will be displayed.
          Advanced Features
          Alarm and sleep operation

          • n Alarm
            • The unit turns on and play desired source (iPod, TUNER or AUX) or Buzzer sound for 30 minutes.
              • The unit turns on and play desired source (iPod, TUNER or AUX) or Buzzer sound for 30 minutes.
          • 1
            • 1
          • Check that the clock is set to the correct time (refer page 13).
            • Check that the clock is set to the correct time (refer page 13).
          • If it is not set, you cannot use the alarm function.
            • If it is not set, you cannot use the alarm function.
          • 2
            • 2
          • For iPOD playback: insert iPod to the unit. (refer page 15)
          • 3
            • 3
          • For TUNER: Set preset memory. (refer page 18)
          • 1 Press and hold the ALARM button for more than 2 seconds.
            • 1 Press and hold the ALARM button for more than 2 seconds.
              • 1 Press and hold the ALARM button for more than 2 seconds.
                • 1 Press and hold the ALARM button for more than 2 seconds.
          • 2 Press the or button to select source or buzzer.
            • 2 Press the
              • 2 Press the
                • 2 Press the
          • Press the ALARM button.
            • Press the ALARM button.
          • 3 If TUNER is selected, press the or button to select a preset station. Press the ALARM button.
            • 3 If TUNER is selected, press the
              • 3 If TUNER is selected, press the
                • 3 If TUNER is selected, press the
          • 4 Press the or button to adjust the hour. Press the ALARM button.
            • 4 Press the
              • 4 Press the
                • 4 Press the
          • 5 Press the or button to adjust the minute. Press the ALARM button.
            • 5 Press the
              • 5 Press the
                • 5 Press the
          • 6 If other than BUZZER is selected in step 2, press the or or VOL (+ or –) button to select volum...
            • 6 If other than BUZZER is selected in step 2, press the
              • 6 If other than BUZZER is selected in step 2, press the
                • 6 If other than BUZZER is selected in step 2, press the
          • l After source is selected in step 2, press and hold the ALARM button.
            • l After source is selected in step 2, press and hold the ALARM button.
          • l If TUNER is selected, press and hold the ALARM button after preset station is selected in step 3.
            • l If TUNER is selected, press and hold the ALARM button after preset station is selected in step 3.
          • l The time and volume will be automatically set to the previous setting.
            • l The time and volume will be automatically set to the previous setting.
          • 1
            • 1
          • Press the ALARM ON/OFF button on main unit to activate and deactivate the alarm function. When ac...
            • Press the ALARM ON/OFF button on main unit to activate and deactivate the alarm function. When ac...
          • 2
            • 2
          • Set to CLOCK function, stand-by mode or demonstration mode.
            • Set to CLOCK function, stand-by mode or demonstration mode.
          l Press the ALARM button.

          • l Press the ALARM button.
            • l Press the ALARM button.
              • l Press the ALARM button.
          l The selected source or buzzer type will blink.

          • l The selected source or buzzer type will blink.
            • l The selected source or buzzer type will blink.
              • l The selected source or buzzer type will blink.
          l The unit will display the alarm time for 3 seconds.

          • l The unit will display the alarm time for 3 seconds.
            • l The unit will display the alarm time for 3 seconds.
              • l The unit will display the alarm time for 3 seconds.
          l During stand-by mode, the display will remain for 6 seconds.

          • l During stand-by mode, the display will remain for 6 seconds.
            • l During stand-by mode, the display will remain for 6 seconds.
              • l During stand-by mode, the display will remain for 6 seconds.
          Example: The time is 10:00 AM and iPod function is selected.
          Notes:
          l Buzzer sound will be output from right speaker only.

          • l Buzzer sound will be output from right speaker only.
            • l Buzzer sound will be output from right speaker only.
              • l Buzzer sound will be output from right speaker only.
          l Alarm will not activate during power on mode.

          • l Alarm will not activate during power on mode.
            • l Alarm will not activate during power on mode.
              • l Alarm will not activate during power on mode.
          l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...

          • l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...
            • l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...
              • l When iPod is selected in step 2, if iPod unit is not detected during alarm activation, source w...
          l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...

          • l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...
            • l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...
              • l When performing alarm using another unit connected to AUX, select AUX in step 2. The unit will ...
          n Snooze function

          • Once alarm has started, pressing the SNOOZE/DIMMER button will stop playback for 5 minutes. Once ...
          To turn off the alarm function

          • During alarm or snooze, press the ALARM ON/OFF button to turn off.
          Advanced Features
          Alarm and sleep operation (continued)

          • n Sleep operation
            • The radio and iPod can be turned off automatically.
          • 1 Play back the desired sound source.
            • 1 Play back the desired sound source.
              • 1 Play back the desired sound source.
                • 1 Play back the desired sound source.
          • 2 Press the SLEEP button on remote control to select sleep time.
            • 2 Press the SLEEP button on remote control to select sleep time.
              • 2 Press the SLEEP button on remote control to select sleep time.
                • 2 Press the SLEEP button on remote control to select sleep time.
          • 3 Press the MEMORY button on remote control.
            • 3 Press the MEMORY button on remote control.
              • 3 Press the MEMORY button on remote control.
                • 3 Press the MEMORY button on remote control.
          • “SLEEP” will appear.
            • “SLEEP” will appear.
          • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
            • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
              • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
                • 4 The unit will enter the power stand-by mode automatically after the preset time has elapsed.
          • The volume will be turned down 1 minute before the sleep operation finishes.
            • The volume will be turned down 1 minute before the sleep operation finishes.
          • 1
            • 1
          • While “SLEEP” is indicated, press the SLEEP button once to select “SLEEP XXX”.
            • While “SLEEP” is indicated, press the SLEEP button once to select “SLEEP XXX”.
          • “XXX” is sleep remaining time.
            • “XXX” is sleep remaining time.
          • l The remaining sleep time is displayed for about 10 seconds.
            • l The remaining sleep time is displayed for about 10 seconds.
          • l You can change the remaining sleep time while it is displayed by pressing the SLEEP button (ste...
            • l You can change the remaining sleep time while it is displayed by pressing the SLEEP button (ste...
          Press the ON/STAND-BY button while “SLEEP” is indicated.
          To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.
          • 1
            • 1
          • While “SLEEP” is indicated, press the SLEEP button to select “SLEEP OFF”, and press the MEMORY bu...
            • While “SLEEP” is indicated, press the SLEEP button to select “SLEEP OFF”, and press the MEMORY bu...
          n To use alarm and sleep operation together

          • For example, you can fall asleep listening to the radio and wake up to iPod in the next morning.
          • 1
            • 1
          • Set the sleep time (see left, steps 1 - 4).
            • Set the sleep time (see left, steps 1 - 4).
          • 2
            • 2
          • While the sleep timer is set, set the alarm
            • While the sleep timer is set, set the alarm
            • (steps 1 - 5, page 19).
          Advanced Features
          Enhancing your system

          • The connection cord is not included. Purchase a commercially available cord as shown below.
          • • When you press any of the following buttons, the unit turns on.
            • l AUX button (main unit): The unit turns on and the AUX function is activated.
              • l AUX button (main unit): The unit turns on and the AUX function is activated.
                • l AUX button (main unit): The unit turns on and the AUX function is activated.
                  • l AUX button (main unit): The unit turns on and the AUX function is activated.
          • n Listening to the playback sounds from VCR, DVD, etc.
          • 1 Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.
            • 1 Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.
              • 1 Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.
          • When using video equipment, connect the audio output to this unit and the video output to a telev...
          • 2 Press the ON/STAND-BY button to turn the power on.
            • 2 Press the ON/STAND-BY button to turn the power on.
              • 2 Press the ON/STAND-BY button to turn the power on.
                • 2 Press the ON/STAND-BY button to turn the power on.
          • 3 Press the AUX button on main unit once or press the FUNCTION button on remote control repeatedl...
            • 3 Press the AUX button on main unit once or press the FUNCTION button on remote control repeatedl...
              • 3 Press the AUX button on main unit once or press the FUNCTION button on remote control repeatedl...
                • 3 Press the AUX button on main unit once or press the FUNCTION button on remote control repeatedl...
          • 4 Play the connected equipment.
            • 4 Play the connected equipment.
              • 4 Play the connected equipment.
                • 4 Play the connected equipment.
          To prevent noise interference, place the unit away from the television.
          n Headphones

          • l Before plugging in or unplugging the headphones, reduce the volume.
            • l Before plugging in or unplugging the headphones, reduce the volume.
              • l Before plugging in or unplugging the headphones, reduce the volume.
                • l Before plugging in or unplugging the headphones, reduce the volume.
          • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
            • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
              • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
                • l Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms...
          • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
            • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
              • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
                • l Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the ...
          • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
            • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
              • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
                • l During alarm activation, sound will be output to the speaker even if headphones is plugged in.
          References
          Troubleshooting chart

          • Many potential problems can be resolved by the owner without calling a service technician.
          • If something is wrong with this product, check the following before calling your authorized SHARP...
          • n General
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l The clock is not set to the correct time.
            • l The clock is not set to the correct time.
          • l Is the ST switch set to the correct setting?
            • l Is the ST switch set to the correct setting?
              • l Is the ST switch set to the correct setting?
              • l Did a power failure occur? Reset the clock.
          • l When a button is pressed, the unit does not respond.
            • l When a button is pressed, the unit does not respond.
          • l Set the unit to the power stand-by mode and then turn it back on.
            • l Set the unit to the power stand-by mode and then turn it back on.
          • l If the unit still malfunctions, reset it.
            • l If the unit still malfunctions, reset it.
          • l No sound is heard.
            • l No sound is heard.
          • l Is the volume level set to “0”?
            • l Is the volume level set to “0”?
          • l Are the headphones connected?
            • l Are the headphones connected?
          n Remote control
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l The remote control does not operate.
            • l The remote control does not operate.
          • l Is the AC power cord of the unit plugged in?
            • l Is the AC power cord of the unit plugged in?
          • l Is the battery polarity correct?
            • l Is the battery polarity correct?
          • l Is the battery dead?
            • l Is the battery dead?
          • l Is the distance or angle incorrect?
            • l Is the distance or angle incorrect?
          • l Does the remote control sensor receive strong light?
            • l Does the remote control sensor receive strong light?
          n Tuner
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l The radio makes unusual noises continuously.
            • l The radio makes unusual noises continuously.
          • l Is the unit placed near the TV or computer?
            • l Is the unit placed near the TV or computer?
          • l Is the FM antenna or AM loop antenna placed properly? Move the antenna away from the AC power c...
            • l Is the FM antenna or AM loop antenna placed properly? Move the antenna away from the AC power c...
          n iPod
          • Symptom
            • Symptom
              • Symptom
          • Possible cause
            • Possible cause
              • Possible cause
          • l No sound is produced. No image appears on the TV/monitor.
            • l No sound is produced. No image appears on the TV/monitor.
          • l The iPod is not playing.
            • l The iPod is not playing.
          • l The iPod is not properly connected to the unit.
            • l The iPod is not properly connected to the unit.
            • l Is the AC power cord of the unit plugged in?
            • l The video cable is not properly connected.
            • l The TV/monitor’s input selection is not properly set.
          • l iPod will not charge.
            • l iPod will not charge.
          • l The iPod is not making full contact with the iPod connector.
            • l The iPod is not making full contact with the iPod connector.
              • l The iPod is not making full contact with the iPod connector.
              • l The main unit is in stand-by mode.
          n Condensation

          • Sudden temperature changes, storage or operation in an extremely humid environment may cause cond...
          • Condensation can cause the unit to malfunction. If this happens, leave the power on until normal ...
          n If trouble occurs

          • When this product is subjected to strong external interference (mechanical shock, excessive stati...
          • If such a problem occurs, do the following:
            • If such a problem occurs, do the following:
          • 1 Set the unit to the stand-by mode and turn the power on again.
            • 1 Set the unit to the stand-by mode and turn the power on again.
              • 1 Set the unit to the stand-by mode and turn the power on again.
                • 1 Set the unit to the stand-by mode and turn the power on again.
          • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
            • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
              • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
                • 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then tu...
            • If neither operation above restores the unit, clear all the memory by resetting it.
          References

          • n Clearing all the memory (reset)
            • 1 Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.
              • 1 Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.
                • 1 Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.
                  • 1 Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.
            • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND button, press the POWER ON/STAND-B...
              • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND button, press the POWER ON/STAND-B...
                • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND button, press the POWER ON/STAND-B...
                  • 2 While pressing down the SNOOZE/DIMMER button and the E SOUND button, press the POWER ON/STAND-B...
            • 3 Can be operate on main unit only.
              • 3 Can be operate on main unit only.
                • 3 Can be operate on main unit only.
                  • 3 Can be operate on main unit only.
            • • This operation will erase all data stored in memory including clock, alarm settings and tuner pre...
          • n Before transporting the unit
            • Remove the iPod from the unit. Then, set the unit to the power stand- by mode. Carrying the unit ...
          Maintenance

          • n Cleaning the cabinet
            • Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
              • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
                • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
                  • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
                    • l Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet fi...
              • l Do not apply oil to the inside of the unit. It may cause malfunctions.
                • l Do not apply oil to the inside of the unit. It may cause malfunctions.
                  • l Do not apply oil to the inside of the unit. It may cause malfunctions.
                    • l Do not apply oil to the inside of the unit. It may cause malfunctions.
          Specifications

          • As part of our policy of continuous improvement, SHARP reserves the right to make design and spec...
          • n General
          • Power source
            • Power source
              • Power source
          • AC 120 V, 60 Hz
            • AC 120 V, 60 Hz
          • Power consumption
            • Power consumption
              • Power consumption
          • 29 Watts
            • 29 Watts
          • Output power
            • Output power
              • Output power
          • Front Speakers: 2 watts minimum RMS per channel into 12 ohms from 50 Hz to 20 KHz, 10% total harm...
            • Front Speakers: 2 watts minimum RMS per channel into 12 ohms from 50 Hz to 20 KHz, 10% total harm...
          • Speaker
            • Speaker
          • 1-way type light-up speaker system
            • 1-way type light-up speaker system
            • Front Speakers: 2-1/2" (6.5 cm) - 12 ohms - Full Range
            • Subwoofer: 4" (10 cm) - 8 ohms - Woofer
          • Speaker maximum input power
            • Speaker maximum input power
          • Front Speakers: 4W/Channel
            • Front Speakers: 4W/Channel
            • Subwoofer: 10W/Channel
          • Speaker rated input power
            • Speaker rated input power
          • Front Speakers: 2W/Channel
            • Front Speakers: 2W/Channel
            • Subwoofer: 5W/Channel
          • Output terminals
            • Output terminals
              • Output terminals
          • Headphones: 16 - 50 ohms (recommended: 32 ohms)
            • Headphones: 16 - 50 ohms (recommended: 32 ohms)
            • Video output: 1Vp-p
          • Input terminals
            • Input terminals
              • Input terminals
          • Auxiliary (audio signal): 500 mV/47 k ohms
            • Auxiliary (audio signal): 500 mV/47 k ohms
          • Dimensions
            • Dimensions
              • Dimensions
          • Width: 15-3/4" (400 mm)
            • Width: 15-3/4" (400 mm)
            • Height: 5-3/4" (145 mm)
            • Depth: 9-7/8" (251 mm)
          • Weight
            • Weight
              • Weight
          • 9.5 lbs. (4.3 kg)
            • 9.5 lbs. (4.3 kg)
          n Tuner
          • Frequency range
            • Frequency range
              • Frequency range
          • FM: 87.5 - 108.0 MHz
            • FM: 87.5 - 108.0 MHz
            • AM: 530 - 1,720 kHz
          Popular Brands

          • Apple
          • Bissell
          • Brother
          • Canon
          • Casio
          • Cisco
          • Craftsman
          • Dell
          • FRIGIDAIRE
          • Garmin
          • GE
          • Honeywell
          • HP
          • John Deere
          • Kenmore
          • LG
          • Maytag
          • Motorola
          • NETGEAR
          • Nikon
          • Panasonic
          • Pioneer
          • Samsung
          • Sharp
          • SINGER
          • Sony
          • Whirlpool
          • Yamaha

          Popular manuals

          • Canon - AE-1
          • Fitbit - Flex
          • Nikon - D5000
          • Nikon - D40
          • Nikon - D3100
          • Nikon - D90
          • Nikon - D7000
          • Nikon - D80
          • Nikon - D3000
          • HP - Officejet Pro 8600
          • Canon - EOS 60D
          • HP - 12C Financial calculator