Document Outline

• Contents
• 1 Introduction
• 2 Getting Started
• 3 Overview
• 4 Summary of how to Operate a Single Machine
• 5 Your Audio-Video Matrix Switcher
• 6 Installing the Audio-Video Matrix Switcher
  • 6.1 Configuring a Stand Alone Switcher
    • 6.1.1 Connecting a Balanced Stereo Audio Input / Output (VS162AV)
    • 6.1.2 Connecting an Unbalanced Stereo Audio Input / Output (VS162AV)
  • 6.2 Assembling a System of Interconnected Switchers
  • 6.3 Dipswitch Settings
    • 6.3.1 Setting the MACHINE #
    • 6.3.2 Understanding the SYSTEM Mode
    • 6.3.3 Understanding the SLAVE Mode
  • 6.4 Connecting a Control Interface
    • 6.4.1 Connecting the RS232 Control Interface
      • 6.4.1.1 Connecting 2 Units using a Null-modem Adapter
      • 6.4.1.2 Connecting 2 Units without using a Null-modem Adapter
      • 6.4.1.3 PC DB9 COM Port Connection to a Unit with a Null-modem Adapter
      • 6.4.1.4 PC DB9 COM Port Connection to a Unit with no Null-modem Adapter
      • 6.4.1.5 PC DB25 COM Port Connection to a Unit
    • 6.4.2 Connecting the RS485 Control Interface
  • 6.5 Configuring the Sync
  • 6.6 Connecting the KEYBOARD EXTENSION
• 7 Operating Your Audio-Video Matrix Switcher
  • 7.1 Startup Display
  • 7.2 Using the Front Panel Buttons
    • 7.2.1 Choosing the Audio-Follow-Video or Breakaway Mode
      • 7.2.1.1 Setting the Breakaway Mode
      • 7.2.1.2 Setting the Audio-Follow-Video Mode
    • 7.2.2 Confirming Settings
      • 7.2.2.1 Toggling between the AT ONCE and CONFIRM Modes
    • 7.2.3 Switching
      • 7.2.3.1 Switching one Input to one Output
      • 7.2.3.2 Switching several Inputs to several Outputs
      • 7.2.3.3 Switching one Input to all Outputs
    • 7.2.4 Clearing
      • 7.2.4.1 Clearing an Output
      • 7.2.4.2 Clearing several Outputs
      • 7.2.4.3 Clearing all Outputs
    • 7.2.5 Storing and Recalling Setups
      • 7.2.5.1 Storing Setups
      • 7.2.5.2 Recalling Setups
• 8 MENU Commands Sequence
  • 8.1 Locking and Unlocking the Front Panel
  • 8.2 Choosing the Follow-System or Breakaway-From-System Mode
  • 8.3 Choosing the SWITCHING METHOD Setting
    • 8.3.1 Understanding the SWITCHING METHOD Settings
    • 8.3.2 Configuring a SWITCHING METHOD
  • 8.4 Choosing the extended Keyboard Setting
  • 8.5 Setting the STORE/RECALL KEYBOARD Mode
  • 8.6 Choosing what to INDICATE
  • 8.7 Choosing the COMMUNICATION Setting
  • 8.8 Setting the IR REMOTE Control
  • 8.9 Choosing the AUTO STORE Current SETUP
  • 8.10 Identifying the MACHINE
  • 8.11 Choosing the initial RESET
• 9 Flash Memory Upgrade
  • 9.1 Connecting the PC to the RS232 Port
  • 9.2 Upgrading Firmware
• 10 Technical Specifications
• 11 Communication Protocol