Hawking Technology HWPS1UG - Manual (Page 31)

Ad-hoc Network: Use this wireless connection if you wish to
connect to the print server directly, bypassing any routers or
access points on your network.
Please press “Next” once you have selected your wireless
network.
If you chose to connect to an encrypted network, this will be
your next setup page. If you are connecting to a non-encrypted
wireless network, please skip to the next step.
19. This setup page allows you to configure your print server
to use the latest in wireless encryption. Please note that your
router or access point must be broadcasting its wireless signal
with the same encryption method that you are setting up on this
screen. There are three types of encryption methods supported
(WEP 64Bit, WEP 128Bit, and WPA). You must assign an
encryption key, when using these encryption methods, that is
the same as the encryption key used to set up your router or
access point.