HoMedics BPA-300 User Manual

Page 11

3. After all symbols disappear, the display will

show a blinking “0”. The monitor is “Ready to
Measure” and will automatically inflate the
cuff to start measurement.

4. Once your systolic pressure is determined, the monitor

will begin deflating to measure your diastolic pressure.

Note: This monitor will re-inflate automatically if the

system detects that your body requires more
pressure for measurement.

5. When the measurement is completed, the cuff will

deflate entirely. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into memory.

1. Press the User Select Button to choose User 1

or User 2.

After the user number is selected, press the
START/STOP button to confirm the chosen user.

2. With the cuff wrapped around your arm, press the

START/STOP button. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 2 seconds.

START

STOP

START

STOP