HONDA HHT35S - Manual (Page 29)

29
FRAME CONSUMER INFORMATION
Dealer Locator Information
To find an Authorized Honda Servicing Dealer anywhere in the United
States:
Call (800) 426-7701
or visit our website:
www.hondapowerequipment.com/dea.htm
Customer Service Information
Honda Power Equipment dealership personnel are trained
professionals. They should be able to answer any question you may
have. If you encounter a problem that your dealer does not solve to
your satisfaction, please discuss it with the dealership's management.
The Service Manager or General Manager can help. Almost all
problems are solved in this way.
If you are dissatisfied with the decision made by the dealership's
management, contact the Honda Power Equipment Customer
Relations Office. You can write:
American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations Office
4900 Marconi Drive
Alpharetta, GA 30005-8847
Or telephone: (770) 497-6400 M-F, 8:30 a.m. - 8:00 p.m. ET
When you write or call, please give us this information:
• Model and serial numbers (page 27)
• Name of the dealer who sold the trimmer to you
• Name and address of the dealer who services your trimmer
• Date of purchase
• Your name, address, and telephone number
• A detailed description of the problem
Honda Publications
These publications will give you additional information for maintaining
and repairing your trimmer.
Shop Manual
This manual covers complete maintenance and overhaul procedures.
It is intended to be used by a skilled technician. Available through
your Honda dealer or through Helm Inc. at (888) 292-5395 or visit:
www.hondapowerequipment.com/own.htm.
Parts Catalog
This manual provides complete, illustrated parts lists, and is available
through your Honda dealer.
Model GX25 GX35
Ignition switch Slide type
Throttle control Two-motion trigger style
Frame
pipe OD 1.0 in (25.4 mm)
Thickness 0.059 in (1.5 mm)
Drive
type Material Flexible steel cable
OD 0.25 in (6.3 mm)
Engagement 0.20 in (5 mm)
square drive both ends
Drive
bushing Material Nylon
Length 57.5 in (1460 mm)
Gear
case Ratio 1.24 : 1
(input : output shaft)
Type Ball bearings, helical cut gears,
no shims required
Clutch Size 2.18 in (55.2 mm) 3.09 in (78.4 mm)
Engagement 4,200 ± 200 rpm
Drive Square female
Type Centrifugal