HoMedics BPS-060 User Manual

Page 7

Text mode
Original mode

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover

towards you to open the battery compartment.

2. Install or replace 4 “AA” sized batteries in the

battery compartment according to the indications
inside the compartment.

3. Replace the battery cover by clicking in the

bottom hooks first, then push in the top end of
the battery door.

Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is

switched on.

As the supplied batteries are for test only, they may
be discharged earlier than batteries you buy in stores.
Replace the batteries in pairs. Use only 1.5V AA
alkaline batteries. Remove batteries when unit is
not in use for extended periods of time.

Note: Batteries are hazardous waste. Do not dispose

of them together with the household garbage.

Battery
Cover