Applying the cuff, Date & time set procedure – HoMedics BPW-201 User Manual

Page 9

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc. prior to

attaching the wrist monitor. Clothing sleeves
should be rolled up and the cuff should
be wrapped around bare skin for correct
measurements.

2. Apply cuff to left wrist with

palm facing up as shown in
Fig. A.

3. Make sure the edge of the

cuff is about 1/4”~1/2” (1 cm)
from the palm as shown in
Fig. B.

DATE & TIME SET PROCEDURE

1. To adjust the date/time, press the

Set button

located on the top of the monitor.

2. The display will show a blinking number showing

the HOUR. Change the HOUR by pressing the

button. Each press will increase the number

by one in a cycling manner. Press the

Set button

again to confirm the entry, and the screen

will show a blinking number representing the
MINUTE.

3. Change the MINUTE, MONTH, DAY and YEAR as

described in Step 2 above, using the

button

to change the numbers and the

Set button

to confirm the entries.

Press the button

blinking HOUR

increasing HOUR

confirm the entry

repeat process to set MINUTE,

MONTH, DAY and YEAR

AVG. 3

Fig. A

Fig. B