HoMedics BPW-201 - Manual (Page 18)

35 36
POTENTIAL FOR ELECTROMAGNETIC
INTERFERENCE
To avoid inaccurate results caused by
electromagnetic interference between
electrical and electronic equipment, do
not use the device near a cell phone or
microwave oven.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
6. Do not immerse the unit in water as this will result in
damage to the unit.
7. Do not subject the monitor and cuff to extreme
temperatures, humidity, moisture, and direct sunlight.
Protect from dust.
8. Do not fold the cuff tightly.
9. Do not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
10. Do not subject the monitor to extreme shocks (do not
drop on floor).
11. Do not inflate the cuff unless wrapped around wrist.
12. Do not wrap the cuff around body parts other than
your wrist.
13. Do not drop or insert any object into any opening.
14. This monitor may not meet its performance
specifications if stored or used outside of these
temperature and humidity ranges:
•
Storage/Transportation
Environment
Temperature:
-4°F~158°F
(-20°C~70°C)
Humidity:
Less than 90% RH
• Operation Environment
Temperature:
50°F~104°F
(10°C ~40°C)
Humidity:
15 ~ 90% RH