Hawking Technology HWR54G - Manual (Page 9)

Introduction
5
Reset Button This button has two (2) functions:
• Reboot. When pressed and released, the Wireless Router will
reboot (restart).
• Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the
POWER LED has flashes YELLOW.
4. Release the Reset Button. The Wireless Router is now using the
factory default values.