AKASO Brave 7 Action Camera - Manual (Page 9)

7
Welcome to your AKASO Brave 7 Action Camera. To capture videos and photos, you
need a memory card to start recording (sold separately).
Memory Cards
Please use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating
• Capacity up to 512GB (FAT32)
Note:
1. Please format the memory card first in this camera before use. To keep your
memory card in good condition, reformat it on a regular basis. Reformatting
erases all your content, so please make sure to offload your photos and videos
before reformatting.
2. FAT32 format memory card stops recording when the file size reaches 4GB, and
starts to record again on a new file.
Powering On and Off
To Power On:
Press and hold the Power button for 3 seconds. The camera beeps while the camera
status light is on. When information appears on the display, your camera is on.
To Power Off:
Press and hold the Power button for 3 seconds. The camera beeps while the camera
status light is off.
Quick Start Guide
When you first power on the camera or reset the camera, the quick start guide will
demonstrate to you some basic operations about how to use the camera, you can
skip the demonstration by tapping Skip on the screen.
Switching Modes
Turn on the camera, swipe your finger across the screen to switch between video or
photo mode. More shooting modes are available under the shortcut menu when
you tap the Current Shooting Mode area on the screen.
Getting Started
EN