Vivotek FE9380-HV 5MP Outdoor Network Fisheye Dome Camera with Night Vision - Manual (Page 345)

VIVOTEK
User's Manual - 345
8.29 Camera Control
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://< servername >/cgi-bin/camctrl/camctrl.cgi?[channel=][&camid=]
[&move=] – Move home, up, down, left, right
[&focus=]
– Focus operation
[&auto=] – Auto pan, patrol
[&zoom=]
– Zoom in, out
[&zooming=&zs=] – Zoom without stopping, used for joystick
[&vx=&vy=&vs=] – Shift without stopping, used for joystick
[&x=&y=&videosize=&resolution=&stretch=]
– Click on image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=][&speedtilt=][&speedzoom=][&speedapp=
< value > ][&speedlink=
ue>] ] – Set speeds
[&return=]
Example:
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&zoom=tele
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x480&videosi
ze=704x480&strech=1
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
camid 0, Camera ID.
move home Move to camera to home position.
up Move camera up.
down Move camera down.
left Move camera left.
right Move camera right.
speedpan -5 ~ 5 Set the pan speed.
speedtilt -5 ~ 5 Set the tilt speed.