1 video input setting per channel – Vivotek FE9380-HV 5MP Outdoor Network Fisheye Dome Camera with Night Vision User Manual
Page 186
VIVOTEK
186 - User's Manual
"capability_image_c
e" is "twovalues".
enablepreview
1/4
Usage for UI of exposure settings. Preview
settings of video profile.
7.8.1 Video input setting per channel
Group:
videoin_c<0~(n-1)>
for n channel products, and m is stream number
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
cmosfreq
50, 60
4/4
CMOS frequency.
(capability.videoin.type=2)
mode
0 ~
"capability_videoin_c
4/4
Indicate the video mode on use.
whitebalance
auto,
manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are listed in
"capability_image_c
4/4
Modes of white balance.
"auto"
: Auto white balance
"rbgain"
: Use rgain and bgain to set
white balance manually.
"manual"
: 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the current
values which is got from white balance
module. Then, act as rbgain mode
"widerange"
: Auto Tracing White
balance (2000K to 10000K).
"outdoor"
: auto white balance mode
specifically for outdoor.
"indoor"
: auto white balance mode
specifically for indoor.
"sodiumauto"
: sodium vapor lamps.
* Only available when
"capability_image_c
"-"
rgain
0~100
4/4
Manual set rgain value of gain control
setting.