512 AUDIO 512-BBA Microphone Boom Arm - Manual (Page 5)

EN | 5
LET'S GET STARTED
Open the clamp at the base of the arm wide enough to
accommodate the flat surface, and place the arm in position.
The clamp will be seated properly when both of its surfaces
are making solid contact with a flat and solid surface on the
top and bottom of the clamp.
Tighten the clamp until the assembly is secure and the base
of the arm won’t move unintentionally.
note
:
Make sure that you don’t over-tighten the clamp! (We
realize that might sound a lot like “make sure you don’t get overly
wet when you go swimming”, or “enjoy your dinner but don’t eat it
all”, but it’s true.)