512 AUDIO 512-BBA Microphone Boom Arm - Manual (Page 4)

4 | EN
LET'S GET STARTED
The BBA is intended to be mounted to a desktop or similar flat surface, using the
clamp assembly at the base of the arm.
Begin by determining where on your worktop the base
should be placed. The boom arm should ideally come close
to forming an inverted “L” when set up, to allow the internal
spring assembly to handle the weight of any microphone
easily. That means that for very deep and large table tops or
work surfaces you may need to mount the arm on the same
side of the table that your body sits on, in order to maintain
the desired shape for the arm.