Obsidian NETRON DMX10-3 10-Port DMX Splitter with Assignable 3-Pin XLR DMX Outputs - Manual (Page 10)

10
(10) 5PIN Opto-Isolated
DMX Outputs
DMX Port Status Indicator LED DMX Port Toggle Switch ( A up/ B down)
LED Color Solid Blink Routing
DMX PORTS BLUE DMX Traffic No DMX Traffic A
DMX PORTS ORANGE DMX Traffic No DMX Traffic B
DMX PORTS STATUS INDICATOR LEDs
O P E R AT I O N : D M X 1 0 - 5 & D M X 1 0 - 3
The concept of the DMX Splitter is to route the A or B DMX Input to any of the 10 output ports. This
allows flexible configuration of the splitter as needed. It is also possible to ignore one input, and assign
all output ports to the same routing. Ports are assigned to the A or B line by the integrated toggle
switches. The LED color of the output ports indicates the DMX routing.
Switch UP = A ( Blue )
Switch Down = B ( Orange )
(2) 5Pin DMX Input
Note that the A & B letter
positions indicate switch
position for routing
DMX10-5
DMX10-3
(2) 3Pin DMX Input
Note that the A & B letter
position indicates switch
position for routing
(10) 3PIN Opto-Isolated
DMX Outputs
DMX Port Status Indicator LED DMX Port Toggle Switch ( A up/ B down)